Livestock Waterers Farm Supplies For Sale In Abbotsford

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

Robert's 1/2" rubber cup ring that fits on the brass plunger.

Hollow black plug used in all Franklin galvanized waterers.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

Useful for feeding or watering rabbits, poultry or any type of small animal. Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage. Capacity is one-half pint (1 cup).

DO NOT SUMBERGE THE REPLACEMENT SENSOR, it is only designed to sense the temperature of the air. The Model HE-CNTRL air sensing thermostat is a replacement for the original "bulb and bellows" thermostat, used to protect from freezing your Hawkeye Steel...

Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

Weather seal Kit for Jug 101, 202 & 404 with or without heat. 1 per model EXCEPT 404 models need 2 kits.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

The one piece construction eliminates cracking and splitting common in plastic-welded, two piece construction tanks. All edges have been rounded for safety and strength. Available in Forest Green in stock, other colors such as Ash Grey, Black, Blue, Red...

Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute. Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred.

Blue Flap for WPM20 Cattle Waterer

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. Working pressure range is 4-175 psi, working water temperature range 34-140 F.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

The inside base of the Franklin Valve. No inside working parts included. This piece holds the plunger and upper arm.

1/2" orfice only for the inside of a Franklin Valve.

Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Frame and cover are made of high impact Rock-ite. Eliminates algae problems as water is not exposed to sunlight. Waterers work on the same principle as a thermos bottle. Tested in continental U.S. to remain frost-free with as few as 6 head drinking every...