Convenient to use when more than one wire is required to hold stock. Ideal for use in temporary electric fencing with round posts from 1/4" to 5/8" diameter.
Has adjustable drag to prevent free wheeling of coil. One-inch shaft turns on greased bushing for smooth operation and long life. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control.
Contracts to 32” when open and includes the unique Safe-Fence tensioners with special gate hood plates to attach the spring and handle to any type of electric fence system. 24' spring gate is excellent for electrically bridging wide gate openings.
Flexible fiberglass polyethylene arms support electrical streamers (30" in length and 6" apart) and bend in any direction. Metal never touches the tractor or vehicle, as it is covered by the fiberglass/polyethylene.
Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard. Heavy duty plastic. Designed so it can be hung from a permanent fence wire or bolted to a post.
Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions. Complete ground rod kit to get the most from your electric fence system.
Prevents gate end from sagging or swinging and may also be used horizontally as a slide latch. Holds the gate open in any position while you drive, walk or run livestock through the gate.
The half spring, springload internal mechanism will not allow you to over stretch. Premium gate handle with comfortable rubber grip and unique internal overstretch protection.
Prevents gate from sagging. Powder coated for long life; includes hardware to mount on gate. 5” x 3 1/4” x 1 3/8”. One-handed operation, designed so it can be opened from horseback.
Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go. The only external fuse protection for fence chargers in the world.
Spring is 1 1/2” diameter, expands from 9” to 18”. One inch of compression equals 150 lbs of tension. Fence compression spring is used to determine wire tension on your fence line.
Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts.
Cords are 46" long and clamps are 3". Made with heavy-duty alligator clamps and double-shielded, high-voltage wire for leak-proof transfer of power from the energizer to the fence and ground rods.
Multi-mode fault finding tool: Current Meter and Digital Volt Meter (DVM) Convenient pocket size Water-resistant and impact-resistant case Large easy-to-read LCD display Long life battery - up to 3 years Auto ON/OFF.
The lights are calibrated to illuminate from 625 to 7000 volts. Convenient extra long 68" ground cord. A simple 8-light power indicator for standard or low impedance fencers.
Close your barbed wire gates with an easy crank handle. Comes with 2 large screws and spring pin. Mounts with 2 large screws. Easily used by anyone, simply turn the crank to desired tension.
6' wide x 9' high and built with a 13-gauge bow frame. Due to manufacturer shipping constraints, the item(s) below must reach a total value of $5000.00 (mix and match on all Powder Creek products) in order to be purchased.
Complete with two connectors and wire to connect two strands of polytape or polywire. Quick and convenient way to make a good electrical connection to your polytape or polywire.
