Livestock Equipment Farm Equipment For Sale In United States

Coated to resist corrosion, the loadbars with proved many years of trouble-free service. Once you have a firm and level surface, it is a quick and easy task to set them up and begin weighing.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

Spring loaded pin allows access panel to pop off with the twist of a screwdriver. You can expect an entire winter's heating bill of $25.00 or less - and this from a drinker that can water 250 head of beef using only 250 watts.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Rugged and ergonomic design. Wirelessly connect with your weigh scale indicator using Bluetooth wireless technology. Keep track of individual animals with the easy-to-use, ergonomically designed SRS2 EID Stick Reader.

Blue 10 3/4" replacement ball for the Mira Fount 3354S, M3370S, M3390, M3390E cattle waterers & 3360-10 hog waterer.

Black rubber seat to fit inside the Mira Fount RED Plunger in a Mira Fount cattle waterer valve.

Replacement 12v Power loom for 3000 Series Indicators.

Te Pari Loadbars have been designed for the rugged animal weighing environment. Constructed of Hot Dip Galvanized steel for durability & fitted with stainless steel load cells, Te Pari Loadbars are reliable, rugged & long lasting.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

This is the arm that opens & closes the plunger. #2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. No other parts come with the Cam Link.

Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers.

The Topaz is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute. Features Has Detach for quick access to valve seal Mounts horizontally or vertically...

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation...

600 watt x 120 volt heating element only Arkfeld waterer element replacement.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

Sealed bottom keeps out moisture & rodents. Stainless steel bolts & removable top afford easy access to plumbing. Optional wing bolts are available for Grade A inspections. Livestock can drink out of both flaps at the same time, not always so with a ball...

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

Sealed bottom keeps out moisture & rodents. Stainless steel bolts & removable top afford easy access to plumbing. Optional wing bolts are available for Grade A inspections. Livestock can drink out of both flaps at the same time, not always so with a ball...

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction...

There also is a 3 inch opening at the bottom of the tower which permits drainage through a tile line to a lagoon, Constant flow at 70 gallon and at 45 gallons, Valve and Heater - 18 month unconditional warranty.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve.

O'Ring only replacement for Frost Pro Accessory.

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

Features heavy duty anti-chew protector. Thermostatically controlled to only run when needed. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete. The most durable floating tank de-icer available with 1250 Watts.