Livestock Equipment Farm Equipment For Sale In Santa Ana

This replaces the former XHD1 system. For permanent installations under manual or hydraulic squeeze chutes or large platforms where extra capacity is required. Brackets sold seperately.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

From time to time I put some of in a tray so they can free choice eat it. It makes a noticeable difference in the consistency of eggs throughout the year. I stir about a 2 cups into a 50 lb bag of feed.

For use on the Silencer HD & Rancher model chutes with 4x2" cross member at the front of the chute. Sets the chute 2 1/2" off the ground. Easy fit, compact design. The Easy Fit Loadcell System is an 8800 lb Capacity system for the Silencer chutes.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

Available in Forest Green in stock, also available in Ash Grey, Black, Blue, Red & Tan colors for special order. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to...

Mostly used on cattle waterers such as Franklin, SPI & MiraFount. Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet.

One thing I wish it had a small hook or something like that so it can be hanged inside of a bucket. Don't expect it to bring the 5 ga pail to boiling temperature though, it's not designed for that.

There are no loose parts. More importantly, the vertical wall of our valve cover has PATENTED ports which allow natural water circulation and efficient heat dispersal into the drinker troughs.

Pride of the Farm Element for electric waterer units.

The Megaflow is compact, robust and manufactured from non-corroding materials. Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom.

40 1/2" x 28 1/4" x 14 1/4" If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole.

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

Other components 5 years unconditional warranty and an additional 6 year pro-rated warranty. Water circulation is a assisted with our patented baffle design and discharge ports. Our 8 notches do not protrude where they can be hit.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

Te Pari Loadbars have been designed for the rugged animal weighing environment. The 24" loadbars have a capacity of 4400 lbs., Designed for manual & hydraulic chutes and have stainless steel load cells.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.