Livestock Equipment Farm Equipment For Sale In Peoria

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

Unaffected by ground movement due to freezing & thawing. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

One battery included in orginal purchase of Reader. Internal rechargeable battery for XRS Stick Reader.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage and minimizes blockage. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice. Nature's ground water temperature does this job. Weather strip & an insulated sleeve for the supply line come with each unit.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage and minimises blockage. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

The Megaflow is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

No other parts come with the Cam Link. This is the arm that opens & closes the plunger. #2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

Pride of the Farm Element for electric waterer units.

White styrofoam round disc float only.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

You should use silicon caulk to assure an airtight fit. The heat tube is designed to mate with the cavity under the drinker base. Both the water line & the electrical supply can enter from below.

Add the Tru-Test MP600 loadbars and desired Indicator or Digistar's Wrangler System to make the scale complete. Separate removable wheel assembly on each side of scale is easily activated by one person to ready for transport.

Connects valve to 301 round float. A brass rod float arm 1/4" x 8" with threads on each end.

This is a sturdy feeder perfect for the backyard flock. Farmers Market Chicken Trough Feeder is made of galvanized metal and includes a wire scratch guard to prevent wasted food.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental...

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

With the extended, un-seasonably cold weather that came early in the Southeast this year, I needed to purchase several trough de-icers. Keeps the whole water tank thawed. Have had mine for many years in 150 gal stock tank.

Turns on at 36 degrees and turns off at 48 degrees. Surface mount thermostat used in galvanized waterers. Often used in Franklin & Arkfeld waterers.