Kuhn Hay And Forage Equipment For Sale In Hills

GA 3200 GT GYRORAKE, 9 Arms, 3 Tires Per Arm, Working Width 10'6", Clean Swept 7'3", 540 PTO, 20 hpmin

Working width: 22' 5"-24' 5".

Kuhn GA 7302DL Twin Gyrorake Side Delivery, 2pt Semi Mount, Cat II or III, Self Steering Rear Wheels, Working Width 23'-24'

12 Wheel Rake, Working Width 18'9" to 23'4", Includes Optional 55" Kicker

VB 3195 Opticut Round Baler, Pivoting Pickup Wheels, Bale Kicker,

Twin Gyro Rake, 2 pt Semi Mounted, 2 Rotors, 11 Arms per Rotor, 4 Tines per Arm, Working Width 22.5" to 24.5", Clean Swept Width 21'10" to 23'9",PTO-S.WWE2280 13/8-6 F5/1R 910, Rear Steering, Wheel Set 10/75-15.3, Lights and Signaling, Hyd Adj of Working...

Minimum Hydraulic Parts Required: 10 GPM at 1650 PSI. Min flow: 1000 RPM. 2 pickups & conveyors. Discharge Capability: Right, Left, or Split. Standard self-contained hydraulic drive.

14 Wheel Rake, Tandem Axles, Working Width up to 28'

$6,000 Discount Available - Opticut 23, high silage, 3D wrapping unit w/ pivoting pre stretchers.

Working width is 8'6", 2 rotors, 7 tine arms per rotor, drawbar, 540 PTO speed, transport width is 9'10", transport height is 9'2", 1,170 lbs, Tractor hydraulic equipment: 1 DA, requires 20 hp tractor power.

$8,000 Discount Available - 3x4 bales,6 knotters, Double knotter, Dual hydraulic-driven fans, 30 twine capacity (rolls), opticut, Individual hydraulic knife protection, Hydraulic brakes, 170 hp/127 kW, 2 SA and 1 DA

Working width: 22' 5"-24' 5".

4 rotors, 7 tine arms per rotor, working width 17' 1", PTO required 20 hp minimum, 1 DA hydraulic connection .

13' working width, 107 minimum PTO HP required, roller conditioner is a diamond block, 1 SA & 1 DA hydraulic connection.

$400 Discount Available - 15' 11"/18', wind row width adjustment 3'7"/8'11", transport width 9'9", transport length, 15'9", machine net weight 1,075.

$400 Discount Available - 15' 11"/18', wind row width adjustment 3'7"/8'11", transport width 9'9", transport length, 15'9", machine net weight 1,075.

Opticut silage baler 14 knives, 4 x 6 bales, VT50 monitor, 14,000 bales.

3pt CAT II hitch, 7; working width, 540, min PTO HP 65, max PTO HP 90, 24 knives, HYD Side shift. Ditch bank mower.

Gladiator 1205-1630 Rock Point 1.5 dry drop fertilizer tubes-16 Row, 9T Twin Bin Gen II, 2 Sec, Montag Blockage Monitor, No Rear Hitch

Gladiator 1205-1630 Single 1.5" dry drop tubes Rock Points, 16 Row Units 9-Ton Montag TwinBin, 4 Sec, Blockage Monitor, No Rear Hitch

Transport width 14'10", transport height 12'3", 11 total shanks, 5 subsoil shanks, 6 chisel shanks. 4-7 mph recommended speed of operation, recommended working depth 8"-16", recommended tractor power range 330-525 PTO hp.

Interceptor 8050-20, 22" 5MM Excalibur Blades 2/32 Flutes, No Daily Grease, Constant Flow Hyd Wing Down Pressure, Transport Width 13'5", Working Width 20', Working Width RTK 19", Weight 18,407#, Max Depth 5", Uses 13 to 15 HP per foot, Speed 8-10 mph,...

Landsman 6205-27, Guardian Hitch 27'-45', 9" edge on Spring Shank, 1/4" x 10" Sweep, 3 Row Tine & Round Reel 27', No Rear Hitch or Wheel Selection, Hyd Gang Adj 27'

Kuhn Axis 50.2 HMC-W Precision Fertilizer Spreader, Hyd Drive, Standard disc's S6VXR-79'-118', Additional disc S10VXR 118' to 157',Cat 3 Hitch, Max Cap 9,260Lbs, 148 cu ft, 2.7 to 446 lbs per acre, Verispeed dynamic-Infinitely variable section control,...