Irrigation Tubing Connectors

• ✓ Flexible design allows for easy of use
• ✓ Available in length of 50', 100', and 500 foot coils

• Manufacturer Warranty: 3 Year Warranty
• Returnable: 90-Day
• Assembled Height (in.): 11 in
• Tubing Length (ft.): 500

• ✓ Total satisfaction policy
• ✓ For use with spot watering emitters and other drip irrigation devices

• Returnable: 90-Day
• Tubing Length (ft.): 100
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): .255

• ✓ 100 ft. coil. O.D. 0.63 in., I.D. 0.54 in.
• ✓ To water plants, add 1/4 in. tubing barbed couplings or drippers
• ✓ Black color
• ✓ Use to run water from faucet or valve to the planting area

• Assembled Height (in.): 3.8 in
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Use with DIGs 0.710 compression fittings, color blue and nut lock fittings
• ✓ Can be installed above or below ground
• ✓ Maximum operating pressure: 60 psi

• Assembled Depth (in.): 21 in
• Outer Diameter (in.): .50
• Color Family: Blacks

• Assembled Depth (in.): 3.0 in
• Tubing Length (ft.): 50
• Color Family: Blacks
• For drip irrigation applications only: Yes
• Inner Diameter (in.): 0.25
• Drip Line/Tubing Type: Porous Tubing

• ✓ Use with DIG Maverick 12-outlet drip manifolds (Models PC1202, PC1204, PC12100 and PC14100)
• ✓ Maximum recommended operating pressure: 35 psi

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Color Family: Blacks
• Assembled Width (in.): 5 in
• Irrigation System Component: Tubing

• Manufacturer Warranty: 3 years
• Assembled Depth (in.): 6 in
• Inner Diameter (in.): 0.25
• Assembled Height (in.): 2.5 in
• Use as a primary feeder line from a 1/2 in. poly-tube: Yes
• Irrigation System Component: Tubing

• Inner Diameter (in.): 0.25
• No special tools or glues necessary for installation: Yes
• Irrigation System Component: Tubing
• Manufacturer Warranty: 3 Years
• Tubing Length (ft.): 50
• Returnable: 90-Day

.25

• Inner Diameter (in.): .25
• Designed for easy installation with standard tools: Yes
• Returnable: 90-Day
• Assembled Height (in.): 3 in
• Outer Diameter (in.): .25
• Assembled Width (in.): 9 in

• ✓ 50 ft. L
• ✓ Flexible design allows for easy of use

• Assembled Depth (in.): 5.5 in
• Outer Diameter (in.): .25
• Returnable: 90-Day
• Irrigation System Component: Tubing

• Color Family: Blacks
• Assembled Width (in.): 17.000 in
• Assembled Height (in.): 19.000 in
• Pressure Rating: None
• Works with most new or existing drip systems.: Yes
• Inner Diameter (in.): 0.5

• ✓ Dimensions = 0.250 O.D. x 0.170 I.D.
• ✓ Use as a drip hose to irrigate containers, gardens and flower beds

• Assembled Height (in.): 2.7 in
• Returnable: 90-Day
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Width (in.): 10.5 in

0.25

• Color Family: Blacks
• Outer Diameter (in.): 0.25
• Close the end of the line with a goof plug: Yes
• Pressure Rating: 25 psi
• Assembled Width (in.): 7.5 in
• Inner Diameter (in.): 0.25

• ✓ Rugged and flexible
• ✓ Works like soaker hose – only better

• Inner Diameter (in.): .54
• Color Family: Browns / Tans
• Pressure Rating: 30 psi
• Drip Line/Tubing Type: Porous Tubing

• ✓ Accepts standard black insert, 0.700 compression fittings, brown barbed fittings or DIG Nut Lock fittings
• ✓ 3-year warranty
• ✓ Large labyrinth water passage and filter intake area in each dripper are continuously flushed by the water flow to reduce clogging
• ✓ Manufactured from linear low-density polyethylene resin with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Outer Diameter (in.): .50
• Color Family: Blacks

• ✓ Maximum operating pressure: 60 psi
• ✓ Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Bending radius: 1 ft.
• ✓ Can be installed above or below ground

• Irrigation System Component: Tubing
• Color Family: Blacks

• Manufacturer Warranty: Limited Lifetime
• Returnable: 90-Day
• Outer Diameter (in.): 0.25
• 50 ft. drip soaker ideal for watering planters and small plants in rows and borders: Yes
• Tubing Length (ft.): 50
• Assembled Width (in.): 6 in

• ✓ For outdoor use only
• ✓ Black in color
• ✓ For drip irrigation applications
• ✓ Works with most new or existing drip systems

• Assembled Width (in.): 24 in
• Returnable: 90-Day

• Inner Diameter (in.): 0.50
• Returnable: 90-Day
• Used with DIG's 0.700 OD compression, Universal and nut lock drip fittings: Yes
• Irrigation System Component: Tubing
• Assembled Width (in.): 19.5 in
• Color Family: Blacks

• ✓ Larger-diameter tubing allows for more emitters on the same line
• ✓ Pressure-compensating emitters ensure even watering and save water

• Pressure Rating: 60
• Outer Diameter (in.): .71
• Returnable: 90-Day
• Irrigation System Component: Tubing

• Outer Diameter (in.): 0.25
• Assembled Height (in.): 9.000 in
• Pressure Rating: 25 psi
• Irrigation System Component: Tubing
• Ideal for slow, deep root watering: Yes
• Assembled Width (in.): 7.000 in

• Assembled Width (in.): 7.000 in
• Irrigation System Component: Tubing
• Outer Diameter (in.): 0.25
• Assembled Depth (in.): 3.000 in
• Returnable: 90-Day
• Made from a flexible PE blend material: Yes

• ✓ 70 psi
• ✓ Compatible with most brands of 1/4 in. Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays

• Returnable: 90-Day
• Irrigation System Component: Tubing
• Inner Diameter (in.): .165
• Outer Diameter (in.): .255

• ✓ Suitable for planter boxes, window boxes, closely planted or narrow areas, vegetable gardens, or looped around roses, shrubs, trees, for gravity feed systems and for green roofs and walls
• ✓ Contains UV inhibitors for long life and extended operation in harsh conditions

• Irrigation System Component: Tubing
• Outer Diameter (in.): 0.25
• Color Family: Blacks
• Assembled Height (in.): 7.75 in

• ✓ High-quality polyethylene material
• ✓ Conforms to strict ASAE standards for minimum inside diameter and wall thickness
• ✓ Dimensions = .250 OD x .170 ID

• Inner Diameter (in.): .17
• Manufacturer Warranty: 1 YR
• Color Family: Blacks

• ✓ Conforms to A.S.A.E. standards for minimum inside diameter and wall thickness
• ✓ Dimensions = .710 O.D. x .620 I.D.
• ✓ Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration

• Assembled Depth (in.): 12.000 in
• Inner Diameter (in.): .62
• Pressure Rating: 1 to 60 psi

0.25

• ✓ 1/2 GPH flow rate from each emitter
• ✓ Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb fitting

• Inner Diameter (in.): 0.25
• Pressure Rating: 25 PSI
• Outer Diameter (in.): 0.25
• Assembled Width (in.): 9 in