Irrigation Drippers Drip Irrigation For Sale In Grand Prairie

With this dripper we highly recommended adding a 3/4 in. We do not recommend extending 1/4 in. Drip tubing, or you can extend the drippers into the plants with 1/4 in. Micro tubing or distribution tubing.

Add some color and excitement to your drip irrigation system with Drip Pets. UV stabilized materials help ensure a long product life. Great to get the kids involved with family and home improvement activities.

This dripper allows connection of multiple drippers along a single line of 1/4 in. Ideal for watering potted plants and plants spaced 10 in. Cap off the end of the line by attaching a short piece of drip tubing to the last dripper and insert a 1/4 in.

Non-draining mechanism provides excellent clog resistance, stops water spill when the system is shutting off, and overall saves water for a very efficient irrigation system. The PC-CV-1 1-GPH pressure compensating drip emitter's self-activated flushing.

RAINDRIP's turbulent flow PC (pressure compensating) drippers maintain their rated flow rate for 10 - 60 PSI inlet pressure. Tubing feeder lines or anywhere they are needed. Can be used at the end of 1/4 in.

Easily connect 1/2 in. Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

Use the Easy Fit 1/2 in. Tee as a hose fitting in your sprinkler and irrigation system. Connection size. Also has 3 openings. The tee has a 1/2 in.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

Low-flow dripper for watering of small plants and containers. Barbed ends for direct insertion into the side of 1/2 in. Tubing for positioning near individual plants. Non-pressure compensating.

The Orbit Sprinkler Riser Adapter connects to a 1/2 in. For outdoor use with cold water only. It comes equipped with a filter to keep out debris.

Use the pressure regulator on any irrigation system that needs a lower pressure. The lower pressure offers protection to your drip emitters that otherwise could be damaged or not operate according to printed specifications due to excessive pressures.

MPT x 17 mm barb adapter is used in the installation of DIG's and others 17 mm pressure compensating (PC) drip line. Utilizing a double barb, the drip line is pushed over the barbed side of the fittings for a tight, leak-free connection.

Simple to insert by hand, or for faster installation use one of Rain Birds insertion tools (sold separately): ET/1PK25S, HPUN1-1S, and HPTCX. This pressure-compensating emitter provides a medium-high 2.0 gallon-per-hour flow rate.

The pressure regulators, installed into the faucet after (downstream of) the backflow device or filter, offer reliable pressure control and provide consistent outlet pressures over a wide range of incoming pressures up to 100 PSI.

The raindrip Vegetable Garden Drip Kit waters up to 50 ft. This kit comes with everything you need to set up your drip watering system. It is ideal for all vegetable garden areas and creates excellent growth and plant health with little water.

Ideal for use with pots, hanging baskets, window boxes and planters. They spray a fine, full-circle mist that is slowly applied to the soil to provide maximum absorption right where plants need it most at the roots.

This multi-stream dripper head is an efficient and gentle way to water potted plants and flowerbeds. Riser or sprinkler stake. It is easily threaded on a 0.25 in. The control knob adjusts water flow and spray distance.

They are designed to provide reliable installation but can be removed if needed. Tees (4-Pack) help you branch a line of tubing in 2 directions. The Toro Blue Stripe Drip 1/2 in.

Distribution tubing. Reusable-loosen nut to remove tubing. To connect, slide tubing over the insert and hand twist the outer nut to lock the tubing on the fittings. For outdoor use and cold water only.

The Universal Elbow connects all major brands of 1/2 in. To be used outdoors with cold water only. To connect, slide tubing over the insert and hand twist the outer nut to cinch the tubing in place.

This kit contains everything you need to water up to 10 potted plants from a single faucet. This kit includes 100 ft. Of vinyl tubing, 10 pressure compensating drippers, 10 barbed tees, 3 barbed crosses, 10 white nail clamps, 1 faucet adapter, 10 support...

This adapter provides simple connection of a drip system to a 3/4 in. Drip irrigation tubing. Compression fittings provide quick, leak-tight connection. Compatible with all brands of 1/2 in.

Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro bubbler flow and height. Throw, allowing you to direct water exactly where you need it in a wide variety of planting areas.

Easily repair tubing breaks using the pail's self-dispensing 250 ft. Adjust flow to growing plants by using the Emitter Installation Tool to add extra runs of emitters with appropriate watering rates.

Available with an FPT, 90° elbow, or straight barb fitting. The patented cutting tip allows the installer to pierce through pipe quickly, while the ergonomic handle allows for comfort.

With this dripper we highly recommended adding a 3/4 in. We do not recommend extending 1/4 in. Drip tubing, or you can extend the drippers into the plants with 1/4 in. Micro tubing or distribution tubing.