Insulated Tanks

Expands with tree growth, preventing tree damage. No nails, metal wire, or hardware required. Removable and reusable. Attaches to trees, gates, livestock panels, steel posts, or vinyl fences with UV-resistant, ready-cut rubber rope.

A high strength wood post insulator for fences that could suffer greater abuse. The claw design allows the material to slide upon impact. Made for stronger materials like twisted or braided rope, Poly Coats and High Tensile wire up to 3/8" diameter.

Slips over XL TuffRing Insulator for use with a cordless drill. Speeds installation time and labor.

Made with UV-resistant polyethylene. 10-year warranty. Easy-to-use pinlock allows for easy wire installation and removal under tension. Multi conductor capable, by having a wide jaw design for use with coated electric fence wire, rope, braid or high tension...

1.5" diameter fire-resistant, donut-shaped insulator with high-quality, white glaze porcelain finish. 15-year warranty.

An ideal insulator for corner or end posts. Works good for posts with an upward or downward pull. Has a metal shank that extends around the curve of the ring for added strength.

This multi-purpose insulator is able to be attached to both sides of a steel post or nailed to a wooden post. It has a pinlock clip that allows for easy fence construction.

A durable screw-in insulator for wood posts. For use with the 1/4” electric rope.

Single molded piece fits securely on standard T-Post sizes 1 1/4" to 1 3/8". For wire or rope.

For use on steel posts without vinyl sleeves.

Screws not included. For use with 2" polytape. Polyethylene insulators for use on vinyl sleeves or wood posts. Locks tight to tape to prevent slipping.

The perfect cap for top of T-post when vinyl sleeve is not used, to prevent injury to horses. Accepts tape and wire on same side.

A unique wood post insulator for rope and wire with the screw molded into the thick polyethylene body. This very strong insulator is able to hold high tensile wire, hot coat or poly-coat fencing.

For wood post electric fences that need to be temporarily lowered for vehicle or stock access such as on laneways, beside drains, and around silage pits. These heavy-duty pinlock insulators are ideal for high-tensile wire, coated wire, or any application...

Extends electric fence wire 5” away from post to protect permanent or damaged fences. Features an unbreakable snap-on/snap-off fastening system, which accommodates standard sized T-Posts from 1 1/4” to 1 3/8”.

Fits T-posts from 1 1/4” to 1 3/8”. Accommodates polytape up to 2” wide.

Stand off bracket keeps electric fence approximately 7" away from the existing fence. Pin Lock holds the wire firmly in place. Intertwine legs of bracket into existing mesh, woven, or barbed wire.

For wire or rope, fits T-posts from 1 1/4" to 1 3/8".

Unbreakable polycarbonate has 5,000 lb. The insulator is the same size as a porcelain insulator, but will not chip or crack. For use on T, wood and metal pipe posts. Tensile strength versus 700 lb.

(#2550-25) Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet. Used for high tensile and temporary electric fences. Fits 1.25 & 1.33 metal T-Posts only.

The T-Post Pinlock Offset Insulator is a multi-purpose insulator that attaches to both sides of a steel post or nails to a wooden post. Pinlock clip allows for easy fence construction.

Features (2) wire holders. If one breaks, rotate the insulator 180º and use the remaining fresh wire holder. Electric fence insulator for use on wood posts. Black polyethylene.

Use on wood posts as line insulators and corners. (Standard #2802, Heavy-Duty #2799) Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet. Sold individually. Suitable for ½" polytape.

For use with polywire, polyrope or high tensile wire. (#SNUG HTW) Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet. Use 2 galvanized roofing, nails or (2) #8 x ¾" stainless steel screws (not included).

Performs in any climate. Ribs prevent insulator from sliding. 4" tube insulator for wood posts. (Part #'s 1724N & 1718). (Pictured with staples.) Rigid high density polyethylene with carbon black for superior UV resistance.