Instruction sheet included. Attaches to trees, gates, livestock panels, steel posts, or vinyl fences with UV-resistant, ready-cut rubber rope. No nails, metal wire, or hardware required.
A high strength wood post insulator for fences that could suffer greater abuse. The claw design allows the material to slide upon impact. Made for stronger materials like twisted or braided rope, Poly Coats and High Tensile wire up to 3/8" diameter.
Easy-to-use pinlock allows for easy wire installation and removal under tension. 10-year warranty. Multi conductor capable, by having a wide jaw design for use with coated electric fence wire, rope, braid or high tension wire.
An ideal insulator for corner or end posts. Works good for posts with an upward or downward pull. Has a metal shank that extends around the curve of the ring for added strength.
It has a pinlock clip that allows for easy fence construction. This multi-purpose insulator is able to be attached to both sides of a steel post or nailed to a wooden post.
Polyethylene insulators for use on vinyl sleeves or wood posts. For use with 2" polytape. Locks tight to tape to prevent slipping. Screws not included.
This very strong insulator is able to hold high tensile wire, hot coat or poly-coat fencing. A unique wood post insulator for rope and wire with the screw molded into the thick polyethylene body.
These heavy-duty pinlock insulators are ideal for high-tensile wire, coated wire, or any application where additional strength is required. For wood post electric fences that need to be temporarily lowered for vehicle or stock access such as on laneways,...
✓ Superior insulation with large heavy duty shield to prevent pulse arcing and reduce power leakage
✓ Heavy duty jaw design to withstand fence tension and keep wires firmly in place
Features an unbreakable snap-on/snap-off fastening system, which accommodates standard sized T-Posts from 1 1/4” to 1 3/8”. Extends electric fence wire 5” away from post to protect permanent or damaged fences.
Stand off bracket keeps electric fence approximately 7" away from the existing fence. Pin Lock holds the wire firmly in place. Intertwine legs of bracket into existing mesh, woven, or barbed wire.
Unbreakable polycarbonate has 5,000 lb. Tensile strength versus 700 lb. The insulator is the same size as a porcelain insulator, but will not chip or crack. For use on T, wood and metal pipe posts.
Used for high tensile and temporary electric fences. (#2550-25) Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet. Fits 1.25 & 1.33 metal T-Posts only.
