Insulated Chainsaw Boots

The claw design allows the material to slide upon impact. Made for stronger materials like twisted or braided rope, Poly Coats and High Tensile wire up to 3/8" diameter. A high strength wood post insulator for fences that could suffer greater abuse.

Slips over XL TuffRing Insulator for use with a cordless drill. Speeds installation time and labor.

Multi conductor capable, by having a wide jaw design for use with coated electric fence wire, rope, braid or high tension wire. Easy-to-use pinlock allows for easy wire installation and removal under tension.

1.5" diameter fire-resistant, donut-shaped insulator with high-quality, white glaze porcelain finish. 15-year warranty.

Works good for posts with an upward or downward pull. Has a metal shank that extends around the curve of the ring for added strength. An ideal insulator for corner or end posts.

This multi-purpose insulator is able to be attached to both sides of a steel post or nailed to a wooden post. It has a pinlock clip that allows for easy fence construction.

For use with the 1/4” electric rope. A durable screw-in insulator for wood posts.

Single molded piece fits securely on standard T-Post sizes 1 1/4" to 1 3/8". For wire or rope.

For use on steel posts without vinyl sleeves.

Locks tight to tape to prevent slipping. Polyethylene insulators for use on vinyl sleeves or wood posts. Screws not included. For use with 2" polytape.

The perfect cap for top of T-post when vinyl sleeve is not used, to prevent injury to horses. Accepts tape and wire on same side.

A unique wood post insulator for rope and wire with the screw molded into the thick polyethylene body. This very strong insulator is able to hold high tensile wire, hot coat or poly-coat fencing.

For wood post electric fences that need to be temporarily lowered for vehicle or stock access such as on laneways, beside drains, and around silage pits. These heavy-duty pinlock insulators are ideal for high-tensile wire, coated wire, or any application...

Extends electric fence wire 5” away from post to protect permanent or damaged fences. Features an unbreakable snap-on/snap-off fastening system, which accommodates standard sized T-Posts from 1 1/4” to 1 3/8”.

Fits T-posts from 1 1/4” to 1 3/8”. Accommodates polytape up to 2” wide.

Pin Lock holds the wire firmly in place. Intertwine legs of bracket into existing mesh, woven, or barbed wire. Stand off bracket keeps electric fence approximately 7" away from the existing fence.

For wire or rope, fits T-posts from 1 1/4" to 1 3/8".

The insulator is the same size as a porcelain insulator, but will not chip or crack. For use on T, wood and metal pipe posts. Tensile strength versus 700 lb. Unbreakable polycarbonate has 5,000 lb.

Fits 1.25 & 1.33 metal T-Posts only. Used for high tensile and temporary electric fences. (#2550-25) Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet.

The T-Post Pinlock Offset Insulator is a multi-purpose insulator that attaches to both sides of a steel post or nails to a wooden post. Pinlock clip allows for easy fence construction.

Black polyethylene. Electric fence insulator for use on wood posts. Features (2) wire holders. If one breaks, rotate the insulator 180º and use the remaining fresh wire holder.

(Standard #2802, Heavy-Duty #2799) Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet. Suitable for ½" polytape. Use on wood posts as line insulators and corners. Sold individually.

(#SNUG HTW) Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet. Use 2 galvanized roofing, nails or (2) #8 x ¾" stainless steel screws (not included). For use with polywire, polyrope or high tensile wire.

Rigid high density polyethylene with carbon black for superior UV resistance. (Pictured with staples.) (Part #'s 1724N & 1718). Performs in any climate. 4" tube insulator for wood posts.

Insulator is 1-1/8"D x 1-7/16"L. Galvanized spring wire. Handy spring clip for fastening electric fence wire to grooved insulators. **Kwik Clip is recommended for easy wire fastening.