Inline Drip Irrigation

• ✓ Covers a total area of 50 ft. over 10 vegetable rows
• ✓ Made from high quality, UV resistant materials
• ✓ 2 outlets per each drip emitter helps to prevents clogging
• ✓ Includes 50 ft. of 1/4 in. drip-line with .65 GPH flow rate from each dripper spaced at 9 in. intervals

• Kit Type: Planters
• Returnable: 90-Day

• ✓ Includes 50 ft. of 1/4 in. distribution tubing
• ✓ Converts all pop-up sprinklers with a 1/2 in. threaded bottom inlet

• Irrigation System Component: Kit
• Included: Filter,Pressure Regulator,Sprinklers,Stakes,Tubing
• Kit Type: Drip Irrigation Kit,Planters
• Returnable: 90-Day

• Product Width (in.): 1.75
• Material: Plastic
• Color Family: Whites
• For outdoor use only: Yes
• Pressure Rating: 80
• Product Height (in.): 1.125 in

• ✓ Black fittings are .600 ID (inside diameter) x .700 OD (outside diameter)
• ✓ Pack of 15

• Pressure Rating: 60
• Fitting Type: Compression Fittings
• Returnable: 90-Day
• Outer Diameter (in.): .50

• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
• ✓ Body material: ABS

• Fitting Type: Push to Connect Fittings
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Product Width (in.): 1.1875
• Connection: Male Pipe Thread

• ✓ Going on vacation? No problem
• ✓ Simple setup - reuse for several seasons
• ✓ Add a capful of liquid fertlizer at each fill - stand back and watch the results

• Irrigation System Component: Kit

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ 1 GPH flow rate from each dripper
• ✓ Included drippers are pressure compensating (PC) providing consistent, uniform flow
• ✓ Easily installed, simple do-it-yourself project

• Kit Type: Patio Starter Kit
• Irrigation System Component: Kit

• ✓ No-leak fit
• ✓ Easy to install
• ✓ Tighter grip as tension increases

.625

• Returnable: 90-Day
• Inner Diameter (in.): .625
• Outer Diameter (in.): .625

• ✓ Fast, easy and convenient installation
• ✓ Allows creation of a custom layout for your planting area
• ✓ 10 pack - 1/4 in. barbed coupling
• ✓ Total Satisfaction Policy

• Connection: Barb x Barb
• Pressure Rating: 0 - 50 psi

• Connection: Screw on
• Drip Irrigation Fitting Type: Coupling
• Fitting Type: Push to Connect Fittings
• Made from high quality, durable materials to ensure a long life in the landscape: Yes
• Product Height (in.): 4
• Material: Polypropylene

• ✓ Connect the Barbed Valve into any type if 1/4 in. tubing
• ✓ Use to control water flow in 1/4 in. drip tubing

• Fitting Type: Barb Fittings
• Material: Plastic
• Product Length (in.): 0.5
• Returnable: 90-Day

• ✓ System includes, reel holder with 2 water supply tubes (50 ft. long each) with drip holes every 12 in., pressure regulator, hose connector, 4 mounting spikes, component hardware
• ✓ Backflow preventer keeps water from re-entering the main water supply and potential contamination
• ✓ Slow and even water flow (0.35 Gallons per hour per drip hole) reduces water waste up to 70% while providing sufficient hydration for your plants
• ✓ Pre-assembled system saves time, no cutting or hole punching required

• Kit Type: Drip Irrigation Kit
• Returnable: 90-Day

• ✓ 1-piece construction
• ✓ No special tools, clamps or glue are needed
• ✓ Color: brown
• ✓ Special, extra sharp barb design for secure and easy installation of the brown drip line without glue or clamps

• Pressure Rating: 35 PSI
• Inner Diameter (in.): .50

• ✓ Made from high quality, durable materials to ensure a long life in the landscape
• ✓ Disassembles easily for maintenance

• Product Height (in.): 5
• Material: Polypropylene
• Product Width (in.): 3.5
• Color Family: Browns / Tans

• ✓ Light and compact design
• ✓ Resistance causes a compression seal that the water cannot penetrate

• Material: ABS Plastic
• Outer Diameter (in.): 0.75
• Returnable: 90-Day
• Pressure Rating: 60

• ✓ For use on all manufacturers' NSF #80, #100, or #160 polyethylene pipe
• ✓ O-ring material: EPDM
• ✓ Slips easily into pipe without the need for tools, clamps, or extra fittings

• Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information
• Outer Diameter (in.): 1.315
• Product Length (in.): 4.625

• Drip Irrigation Fitting Type: Cap
• Material: Polyethylene
• Product Length (in.): 1.75
• Works with the most common sizes of 1/2 in. drip tubing (0.670-.710 O.D.): Yes
• Product Height (in.): 1.25
• Inner Diameter (in.): 0.5

• Product Height (in.): 1.25
• For irrigation applications only: Yes
• Manufacturer Warranty: 1 Year Limited Warranty
• Returnable: 90-Day
• Color Family: Blacks
• Package Quantity: 1

• ✓ Easy push-together installation
• ✓ Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting, and twist fitting onto tubing while inserting if necessary

• Drip Irrigation Fitting Type: Tee
• Product Length (in.): 4
• Material: Plastic
• Pressure Rating: 0 - 60 psi

• ✓ Kit includes: 10 blue 0.5 GPH emitters, 10 black 1 GPH emitters, 10 red 2 GPH emitters, 10 tie-down stakes, 1 hole punch, 24 hose plugs, 1 end clamp and 1 hose adapter
• ✓ Use to connect Blue Stripe Drip 1/2 in. tubing to an outdoor faucet
• ✓ Self-flushing NGE emitters are pressure compensating for uniform flow, even on sloping landscapes

• Included: Stakes
• Number of pieces included: 67
• Irrigation System Component: Kit

• ✓ Connects any 1/2 in. drip tubing
• ✓ Disassembles easily for maintenance
• ✓ Made from high quality, durable materials to ensure a long life in the landscape

• Color Family: Browns / Tans
• Product Length (in.): 1.5
• Product Width (in.): 3.5

• ✓ 2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line
• ✓ Easy to customize or expand your system; you can add additional tubing, feeder lines and fittings to fit your drip system to your landscape; or add our newly designed timer to make watering automatic and stop watering by hand while keeping your plants healthy even when you're on vacation
• ✓ Kit includes: 50 ft. of 1/4 in. pre-assembled tubing and 10 wire stakes

• Returnable: 90-Day
• Manufacturer Warranty: 2 year limited
• Included: Garden Hose Connection,Stakes,Tubing

• ✓ Eliminates the need to hand water free-standing planters and patio pots
• ✓ Save water and money
• ✓ Makes it easy to water your plants consistently every time
• ✓ Eliminates hand watering of free-standing planters & patio pots

• Irrigation System Component: Kit
• Number of pieces included: 40

• ✓ Bleed function allows you to flush any debris from system
• ✓ Slow and even water flow (0.35 Galllons per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants
• ✓ Pre-assembled system saves time, no cutting or hole punching required

• Included: Backflow Preventer,Filter,Garden Hose Connection,Pressure Regulator
• Color Family: Blacks
• Package Quantity: 29

• ✓ Accepts any manufacturer's O.D. tubing from 0.630" to 0.700"
• ✓ UV resistant plastic for long life
• ✓ Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from 0.630 in. to 0.700 in.

• Color Family: Blacks
• Fitting Type: Push to Connect Fittings
• Product Height (in.): 8.8 in

• ✓ Resistance causes a compression seal that the water cannot penetrate
• ✓ No special tools or glues needed

• Product Length (in.): 10 in
• Material: ABS Plastic
• Fitting Type: Compression Fittings
• Manufacturer Warranty: 3 year

• ✓ Easy to use
• ✓ For drip irrigation applications only

• Color Family: Blacks
• Inner Diameter (in.): 0.5
• Manufacturer Warranty: None
• Drip Irrigation Fitting Type: Coupling