Infeed Conveyor

See attached picture..not the same but looks similar. Also have a dual axle power tilt/winch trailer for loading and unloading. Holds 3000 pounds of weeds, Kubota 40 hp diesel engine with low hours.

To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec

I have tried using the conveyor that rolls up inside a six inch tube but have found that the belt cuts thru the tube after about a year and a half. Looking for a sixteen foot belt conveyor to feed my mobile seed cleaner.

Shenyang Itons Drying Equipment INC designs and manufactures dryer systems for use in the engineered wood and composite panel industries as well as in other applications such as biomass drying and ethanol production.

.2kw, 220/440v, 3ph, 60hz Variable speed feed rollers Push button controls New in 1998 Serial no. Four (4) Feed Belt Arms Each arm is 68” long with 1/2” Wide belt Ten (10) Infeed rollers Each roller is 9 1/2” long x 2 1/2” diameter Motor Approx.

Manure Spreader MODEL K G D 3 K G D 7 K G D 10 K G D 12 K G D 15 Capacity 3 M3 7 M3 10 M3 12 M3 15 M3 Lenght 5000 mm 6000 mm 7000 mm 7800 mm 8000 mm Width 2100mm 2300 mm 2300 mm 2300mm 2300 mm Height 2200mm 2400 mm 2600 mm 3100 mm 3400 mm Weight 2100...

2018 Akron GTT4010

2009 Brandt 1545LP $16,402.00

All new bearings! Used Batco 1314 with 5 HP electic motor.

8,000 bph, 4 years old, 7.5hp 1ph motor included, winch included

Brandt Conveyor 2021LP, Like New

NEW, Batco 1590

2018 Akron EXG300

2018 Akron EXG300

Model 1545 Tube Conveyor (Shown) 1525, 1530, 1535, 1540, 1545 Tube Conveyor Capacity Up to 6,000 BPH* *Capacity depends on material, moisture, density, and angle Tubing 10” Diameter Tubes Belt 15” 2 Ply Chevron Belt Speed Standard 600 FPM Top Drive...

Width Capacity: 40" Feed Table Length: 14' Fence Length: 188" 3 HP Lateral Chain Motor Top Hold-Down Roller Powered Pinch Roller Feeds Material into the Saw Steel Feed Rolls

Log infeed Waggon complete very good contition!

6000 BPH 10" Diameter, 14 Gauge Tubing Steel or Stainless steel avaialble

6000bu/hr pit conveyor

Electric power 5hp. Portable cleated belt conveyor. 30ft long Capacity varies depending on angle of use. For use up to 40 degrees.

#D140 Blackwell 15' Conveyor

• 25hp electric motor drive with Leroy Somer 215 shaft mounted speed reducer. • Belt speed approximately 320 FPM. • 24" deep lattice frame construction with 3"x3"x1/4" chord angles.

13 1/2" Self-cleaning flat bar tail pulley with 2 3/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 6' receiving hopper with 6" rubber flashing.

30" x 80' Truss Frame w/Radial Stacking Carrier

10" deep channel frame construction. 2-ply belting with 3/16"x1/16" covers. 13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups.