Hose Management Accessories Parts Department For Sale In Alabama

Type 304 machined stainless steel ball and arm assembly and side plates. 24" with U-bolts for 2" tubing. Full 1/2" thick nylon wear pad. Support Arms weigh 4.5 lbs. Adjustable Heavy Duty Hose Support Arms support the hose for proper tension and maximum...

For smaller ID tubing such as 1/2" milker hose and 1/4" vacuum hose as in goat milker set-ups. Small Blue Rubber Hose ring holds vacuum and milker hose together for ease of handling the milking cluster in parlor, pipeline or bucket milking.

This is Blue Hose Clip for 5/8 Milk Hose. Small Hose Clip holds 1/4" or 9/32" twin vacuum hose neatly together with the milk hose.

Fits all sizes of milker hose. Small silicone hose ring holds milker and vacuum hose together.

Constructed out of heavy gauge stainless steel, this clamp willl provide for years of service. The Snap Clamp shuts off milk tubing with a simple flip of the locking lever. This Snap Clamp is for up to 1 and 3/16 OD.

Replacement external o-ring for Delrin vented and non-vented shut-off valves.

Included are boot cover and mounting bracket. This model has 5/32" push fitting and may be used for up to 7/8" ID tubing. Plastic Pinch Valve provides air-operated shut-off for milker tubing.

Vacuum-operated plastic shut-off valve is for 5/8" ID tubing.

Replacement Blade for T100.

Made out of tough nylon with a sharp steel replaceable blade, Kwikcut works well on rubber and plastic tubing, thin wall PVC pipe and schedule 40 PVC pipe, making a clean cut with no burrs or sawdust.

BT100 Replacement Blade for T100 sold separately. Made out of tough nylon with a sharp steel replaceable blade, Kwikcut works well on rubber and plastic tubing, thin wall PVC pipe and schedule 40 PVC pipe, making a clean cut with no burrs or sawdust.

Vacuum-operated plastic shut-off valve inserts into 5/8" ID tubing.

Facilitates shut-off of vacuum or milk flow with Transflow or rubber tubing. This Smooth white plastic non-vented shut-off valve twists cleanly to a positive stop.

Replacment Nylon Wear Pad for Double Bend Hose Support Arms model numbers 120215D, 120220D, 102215D, 102220D.

Replacement Brush only for Cable Kit with ID (internal diameter) of 7/16", 1/2", 9/16", 5/8" and 3/4".

Facilitates shut-off of vacuum or milk flow with Transflow or rubber tubing. This Smooth white plastic vented shut-off valve twists cleanly to a positive stop.

Vacuum-operated shut-off valve is used with 5/8" to 3/4" tubing.

8'4" cable with 7/16" burr and 1/2" brush cleans 1/2" diameter hose. Simply thread the plastic covered steel cable through the hose, snap wall and cable fittings together, attach brush part to cable, and pull the brush through as the hose is thoroughly...

Fits all sizes of milker hose. Small rubber hose ring holds milker and vacuum hose together.

Polyurethane jacket is non-marring and abrasion resistant. Designed with dual-braided construction of steel over polyester and jacketed with polyurethane for high strength, durability and kink resistance.

Weather and abrasion-resistant extension hose made specifically for use with all Sun Joe SPX series pressure washer models. Flexible design resists kinking, rated up to 2030 psi for years of reliable performance.

Replacement Gasket for 120132 S.S. Shut-off Valve.

Hose Extensions in between the power washer and the original high-pressure hose for a convenient way to extend the cleaning range of your AR power washer. AR112, AR112S, AR116, AR118, AR142, AR142S, AR240, AR240S, AR260, AR383, AR383S, AR383SS and AR527.

Thermoplastic replacement hose is designed for use on pressure washers and is rated to 3600 psi. Karcher's 25 ft. Compatible with Karcher gas pressure washers and electric models K1710Cube, K1710, K1810, K1910 and K2010, as well as most major brands of...

Plastic Snap Clamp provides manual shut-off for tubing up to 7/8" ID.

Beautifully machined with mirror-smooth finish. This Stainless steel shut-off valve has a full 5/8" opening. For 9/16" and 5/8" tubing.

Constructed out of heavy gauge stainless steel, this clamp will provide for years of service. The Snap Clamp shuts off milk tubing with a simple flip of the locking lever. This Snap Clamp is for up to 1" OD.