Push probe into hay to take samples 5/8" diameter and up to 18" or 24" deep. The Best Harvest Push Probe Hay Sampler allows you to collect samples from hay bales for testing purposes.
One year warranty. Measures a moisture range of 8% - 44%, but is most accurate from 12% - 30%. Requires 9-volt battery (not included). Measures bale temperature from 33 - 250 degrees F.
The Best Harvest Drill Probe Hay Sampler makes it easy to collect samples from hay bales for moisture and nutrient testing. The Drill Probe Hay Sampler allows one person to bag multiple hay samples quickly.
To determine moisture content, sample is weighed and then dried repeatedly until there is no change in the sample weight from one drying to the next. One-year warranty. Includes fixed temperature evaporation drying unit, specimen container, and digital...
The Advanced Hay Moisture Tester automatically compensates for the bale density giving more accurate testing results. Specifications: Hay and Haylage: 8% – 80% Straw: 8% – 25% Hay Silage: 30% – 84% Corn Silage: 40% – 76% Alfalfa: 8% – 75% Temperature...
✓ Two-year warranty
✓ USB cord included
✓ USB port for scale and software updates, including exporting tests to your computer
✓ Displays average and high reading for each bale tested
Higher-frequency, capacitive circuit improves accuracy. Repeatability in normal range of stored grain within 0.5% of air-oven standard. Direct readout for 16 grains: barley, canola, corn, flax, oats, rice (2), rye, sorghum, soybeans, sunflower (2), and...
Quickly measure the moisture content of hay or forage in a windrow, so that you can determine the best time to begin baling. Measures a range of 13% - 70% moisture, within 4% accuracy.
1/4 inch (6-7mm)diameter Alfalfa hay pellets with minimum 17% CP and 10% moisture, low ash,forage test report available for each lot. Dehydrated condensed Alfalfa mix hay pellets available in bulk, 1 ton totes, and 40 pound bags for domestic and export...
Hay and straw producer and supplier in Sand Creek, MI located near MI/OH/IN state line. Products available in small square or round bales. Straw great for erosion control, biomass, animal bedding, contracting needs, and other uses.
Use this to calibrate your HI9813-6 meter! Hanna Instruments formulates this TDS calibration solution for use with their HI9813-6 meter. Hanna designed this solution for premium quality.
Specs
Product Features
Volume: 230 mL: Specs
TDS value: 1500 mg/L (ppm) at 25° C: Specs
Airtight bottle with tamper-proof seal: Product Features
Temperature chart actual mg/L values: Product Features
It measures multiple parameters with a single test. Hanna pre-amplifies this 3-in-1 probe. Replace your Hanna Instruments probe! Hanna Instruments designed this replacement probe to fit their HI9814 portable meter.
Each unopened sachet has an expiration date of 5 years from the date of manufacture. Quickly calibrate your compatible Hanna Instruments device! Use this Quick-Cal solution your Hanna pH and EC/TDS meters.
Specs
Product Features
pH calibration buffer value: 6.86 pH: Specs
Ready to use fresh solution for accurate calibration: Product Features
Quantity: 25: Specs
Single-use sachets: Product Features
EC calibration standard value: 5,000 μS/cm (5.00 mS/cm): Specs
Each unopened bottle of solution has an expiration date of 5 years from the date of manufacture. They then apply a tamper-proof seal. Find your desired S/cm value below. This process ensures the quality of the solution.
Product Features
Temperature chart/ actual S/cm values printed on each bottle: Product Features
S/cm Value: 1413 S/cm at 25° C
Size: 230 mL: Specs
Certificate of analysis included: Product Features
Each unopened bottle has an expiration date of 5 years from the date of manufacture. Hanna Instruments specially formulated their line of calibration solutions. Quickly calibrate your compatible Hanna Instruments device! Use this Quick-Cal solution your...
Product Features
Specs
Airtight seal to ensure quality: Product Features
Two calibration solutions in one: Product Features
EC calibration standard value: 5,000 μS/cm (5.00 mS/cm): Specs
This cartridge features two o-rings that maintain a watertight seal. Make electrode replacement quick and easy! Hanna Instruments designed this electrode as an easy-fit cartridge. Simply lock the unit into place — no pins to line up means that you are...
No tractor stuff, all horse drawn. Left over from farm last in full operation in the 1940's. Farm equipment from 1920's in Western NC. Have several horse drawn plows in various conditions, a hay rake, mower, and cultivator.
Have you used one of our cleaning solutions to clean your electrode? This solution ensures optimum performance of your pH and ORP electrodes. This keeps the electrodes glass membrane properly hydrated.
Each unopened bottle of solution has an expiration date of 5 years from the date of manufacture. They then apply a tamper-proof seal. Find your desired pH value below. This process ensures the quality of the solution.
Specs
pH value: Varies — see individual product page for details: Specs
Hanna Instruments outfit the HI9814 with a waterproof housing (rated for IP67 conditions). This probe measures pH, conductivity (EC), total dissolved solids (TDS), and temperature.
Product Features
Specs
Waterproof — rated for IP67 conditions: Product Features
Temperature resolution: 0.1° C / 0.1° F: Specs
Measures pH, EC, TDS, and temperature: Product Features
TDS range: 0 to 3000 ppm (0.5 CF); 0 to 3999 ppm (0.7 CF): Specs
Selectable EC to TDS conversion factor: 0.5 or 0.7: Product Features
The Model "LT" is the ultimate in sensitivity at the very "Wet" end of the soil water range(below 20 centibars of soil water suction)! It was designed to operate in very low water holding capacity soils (coarse sand) and non-soil planting mixes used in...
Uses AA or dry cell battery. Top mounted meter. Meters can be calibrated to the soil type for reliable results. Probe - Instant, easy-to-read display. The scientific way to water! Accurate instruments give you instant, accurate moisture readings.
A back saver! Foot step for better penetration in tough soils! Taper cut tip goes in easy and cuts a nice clean core, insuring complete sample removal. Core is approximately 14.25in.
You should calibrate EC meters every 1-4 weeks depending on frequency of use to verify their accuracy. Calibration solution for EC meters Conductivity calibration solution for meters measuring EC (electrical conductivity).
