Agiseek home

Grow Room Ventilation Grow Tents Accessories For Sale In Hawaii

Become a Partner
17.5 in. Combustible Base
Prices start at : 108.85 USD / each

The combustible base provides the proper clearances required and is easy to install as it is manufactured to match the dimensions of all 17.5 in. Ensure your gas furnace is properly installed for down-flow, heat only applications by using a combustible...
  • Product Weight (lb.): 6.0lb
  • Brand/Model Compatibility: Winchester W8M, W9M, and W9V Series Gas Furnaces
  • Manufacturer Warranty: 5 Years
  • Combustible base in not required when the furnace is installed on an air conditioning or heat pump evaporator coil: Yes
  • Product Depth (in.): 29.5
  • Returnable: 90-Day
United States
Hawaii
Universal Heavy-Duty Air Conditioner Support
Prices start at : 40.98 USD / each

The support holds up to 160 lb. Optimize the safety of your air conditioner installation with the Universal Heavy-Duty Air Conditioner Support. And is made of heavy-gauge, epoxy-coated steel.
  •  Transfers the weight of the air conditioner from the window sash and sill to the support and window frame for safety
  •  Supports up to 160 lb.
  •  Heavy-gauge, epoxy-coated steel construction for durability
  •  Stainless-steel hardware
  • Product Depth (in.): 19.5
  • Product Height (in.): 1.75
United States
Hawaii
115-Volt Aftermarket Replacement Specific Purpose Blower for Intercity
Prices start at : 169.67 USD / each

For gas or oil furnaces and heaters. Counterclockwise shaft end rotation. Cross-reference information: ICP 7021-10299, 7021-10702. Specific purpose blower with ball bearings. This Fasco aftermarket equivalent is Shaded Pole, 115-Volts, 3400 RPM, 1 Speed,...
  •  New aftermarket replacement furnace inducer motor
  •  Includes extension flange
  • Product Width (in.): 10.5
  • HVAC application: Heating
  • Brand/Model Compatibility: ICP, Fasco
  • Product Depth (in.): 12
United States
Hawaii
24 in. Vent Enclosure for Forsaire Top-Vent Counterflow Furnaces
Prices start at : 40.3 USD / each

Vent Enclosure fits all Forsaire Top-Vent Counter flow furnaces. Williams 24 in. The vent enclosure kit is used when the furnace is surface mounted. It encloses the vent pipe from the top of the surface to the ceiling.
  •  Durable metal construction
  •  Soft white finish to match furnace
  •  Fits forsaire top-vent counter flow furnace models: 6008532, 6008531, 3508732, 3508731, 5008732, 5008731, 6508732, 6508731, 3508332, 3508331, 5508332 and 5508331
  • Brand/Model Compatibility: Williams Forsaire Top-Vent Furnaces
  • Manufacturer Warranty: Refer to Williams' Limited Warranty for details
  • Product Depth (in.): 6
United States
Hawaii
8 in. Plastic Diffuser
Prices start at : 15.93 USD / each

A 200 VR round plastic air diffuser is suitable for 8 in. It has been designed to provide both an unobtrusive appearance that complements any decor and high quality performance. It is suitable for both air intake and exhaust.
  •  Easy, snap-in installation
  •  Baffle can be rotated to obtain the required air consumption listed in the specifications
  •  Contains no flange

9.75

    • Product Weight (lb.): 0.5lb
    • Product Width (in.): 9.75
    • Product Height (in.): 9.75
    United States
    Hawaii
    S-Line 6 in. 340 CFM Inline Fan
    Prices start at : 140.87 USD / each

    The fan and motor are precisely balanced for a quiet and vibration-free operation. S-Line Mixed Flow Fans are designed for residential and light commercial ventilation applications.
    •  Quiet and vibration-free operation
    •  Prewired with 120-Volt power cord
    •  100% speed controllable
    • Brand/Model Compatibility: Dial-A-Temp Vari-Speed
    • Manufacturer Warranty: 10 year warranty
    • HVAC application: Ventilation
    United States
    Hawaii
    Adjustable Aluminum Dryer Duct
    Prices start at : 16.98 USD / each

    This duct allows the dryer to be placed close to the wall for optimum space utilization. The Adjustable Aluminum Duct is ideal for use in tight fitting clothes dryer applications. Consists of a 2-piece all aluminum construction.
    •  Adjustable from 28 in. to 45 in.
    •  Thin design allows dryer to be placed 3 in. from the wall
    • Product Height (in.): 4.04
    • Product Diameter (in.): 6 in
    • Insulated: No
    • Product Length (in.): 30
    United States
    Hawaii
    36 in. L Vent Enclosure for forsaire Top-Vent Counterflow Furnaces
    Prices start at : 41.92 USD / each

    Vent Enclosure fits all Forsaire Top-Vent Counter flow furnaces. Williams 36 in. The vent enclosure kit is used when the furnace is surface mounted. It encloses the vent pipe from the top of the surface to the ceiling.
    •  Fits Forsaire top-vent counter flow furnace models: 6008532, 6008531, 3508732, 3508731, 5008732, 5008731, 6508732, 6508731, 3508332, 3508331, 5508332 and 5508331
    •  12 in. or 24 in. models available to accommodate various ceiling heights
    •  Soft-white finish to match furnace
    • Product Weight (lb.): 12lb
    • Product Depth (in.): 7
    • Product Height (in.): 36
    United States
    Hawaii
    14.5 in. Combustible Base
    Prices start at : 101.74 USD / each

    The combustible base provides the proper clearances required and is easy to install as it is manufactured to match the dimensions of all 14.5 in. Ensure your gas furnace is properly installed for down-flow, heat only applications by using a combustible...
    • Product Width (in.): 14.5
    • Manufacturer Warranty: 5 Years
    • Returnable: 90-Day
    • For use with 14.5 in. gas furnaces being installed on a combustible floor: Yes
    • Brand/Model Compatibility: Winchester W8M Series, W9M Series, and W9V Series Gas Furnaces
    • Product Weight (lb.): 5.0lb
    United States
    Hawaii
    10 in. x 25 ft. Non-Insulated Black Lightproof Flexible Aluminum Ducting with Duct Clamps
    Prices start at : 26.45 USD / each

    The Hydro Crunch 10 in. Made from high quality aluminum, not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.
    • Product Length (in.): 25 ft
    • Product Height (in.): 11 in
    • Product Depth (in.): 14.5 in
    • Color: Black
    • Wide variety of applications: HVAC, bathroom, greenhouse, grow room and tent: Yes
    • Product Width (in.): 10 in
    United States
    Hawaii
    Fin Clamp Baseboard Element for 1/2 in. Copper Baseboard Piping 2 ft. Section
    Prices start at : 68.00 USD / each

    It goes around the pipe and is held in place with a custom clamp. Replace missing fins and increase boiler efficiency. Fin Clamp Baseboard Element is a multi-fin "Hinged" hydronic heating element that can be attached to existing hot water or steam pipes.

    2.13

      • Product Width (in.): 24
      • Product Weight (lb.): 2.75lb
      • Product Depth (in.): 2.13
      • Product Height (in.): 2.13
      • Can be sized to fit your needs: Yes
      • Returnable: 90-Day
      United States
      Hawaii
      V-Series 16 in. XL Powerfan Inline Duct Fan
      Prices start at : 1388.9 USD / each

      All VTX models come with galvanized mounting brackets allowing either horizontal or vertical installation. Manufactured in Canada, the Vortex Powerfans In-Line Duct Blowers are ideal for use in general purpose exhaust and duct boosting applications.
      • Manufacturer Warranty: 3 years
      • Brand/Model Compatibility: Any type of solid state speed control made for brush less motors.
      • Returnable: 90-Day
      • HVAC application: Ventilation
      • Product Width (in.): 24.75
      • Product Depth (in.): 24.5
      United States
      Hawaii
      200 CFM Power 5 in. Energy Star Rated Mixed Flow In-Line Duct Fan
      Prices start at : 80.03 USD / each

      Used for both supply and exhaust applications that require powerful airflow. TT Silent 125 Mixed Flow In-Line Fan is ideal solution for multi-purpose use in residential and commercial ventilation.
      •  Long life ball bearing motor
      •  Duct compatibility: 5 in. Dia
      •  Double-speed capacitor motor with thermal overload protection ensures safety and prevents product damage
      •  Corrosion and vibration free
      •  Energy efficient: 25 to 37-Watt to reduce electric cost and save you money
      • HVAC application: Ventilation
      United States
      Hawaii
      15 in. Vent Extension for Direct-Vent Gravity Furnaces
      Prices start at : 63.6 USD / each

      This vent extension is designed to accommodate venting through a wall up to 15 in. Vent tubes only, does not include outside cap. Use Williams' 15 in. Vent Extension to meet your installation needs.
      •  For Williams' direct-vent gravity models 2203621, 2203622, 3003621 and 3003622
      •  Includes flue extension tube, air inlet tube and air inlet shield

      9.5

        • Product Width (in.): 9.5
        • Product Depth (in.): 18.5
        • Brand/Model Compatibility: Direct-Vent Furnaces - 22,000 and 30,000 Btu
        • Product Height (in.): 9.5
        United States
        Hawaii
        Economy Plus Air Conditioner Filter 25 ft. Roll
        Prices start at : 34.44 USD / each

        It rinses clean for easy reusability. Roll that will allow you to cut to fit desired area. Help protect your air conditioner with the AC Safe Economy Plus Air Conditioner Filter. The non-woven polyester construction helps trap dust and airborne particles.
        •  25 ft. roll that will allow you to cut to fit desired area
        •  Rinses clean for reusability
        •  Traps most dust and airborne particles
        • Manufacturer Warranty: NONE
        United States
        Hawaii
        7 in. Round Fresh-Air Plate
        Prices start at : 5.57 USD / each

        Round Fresh-Air Plate is used to cover a house vent which vents through an outside wall. Includes a spring clamp which inserts into the vent and adheres the plate to the outside wall.
        •  Aluminum construction
        •  Includes spring clamp
        • Product Width (in.): 8
        • Product Depth (in.): 7
        • Product Height (in.): 0.50
        • Product Weight (lb.): 0.326lb
        United States
        Hawaii
        Gas Conversion Kit from Propane Gas to Natural Gas for 20,000 BTU
        Prices start at : 45.72 USD / each

        Convert your Hearth propane heater, model number 2001621, into a natural gas version. LPG Gas Conversion Kit for Williams Hearth Heater 200 Series model number 2001621. Kit contains all items necessary for conversion from propane gas to natural gas.
        • HVAC application: Heating
        • Product Height (in.): 10
        • Product Width (in.): 6
        • Returnable: 90-Day
        • Propane to natural gas (LP) conversion: Yes
        • Product Weight (lb.): 1lb
        United States
        Hawaii
        High-Capacity Roof Cap
        Prices start at : 151.12 USD / each

        Round aluminum flap-equipped damper built into this Model 437 Broan High-Capacity Roof Cap helps minimize backdrafts. It maximizes airflow up to 1,200 CFM, allowing easy system venting.
        • Flexible: No
        • Brand/Model Compatibility: Broan, NuTone
        • Product Depth (in.): 18.5 in
        • Maximum Product Height (in.): 12.34
        • Compatible Appliance Type: Range Hood
        • Includes backdraft damper and bird screen to help protect your ductwork: Yes
        United States
        Hawaii
        Fin Clamp Baseboard Element for 1 in. Copper Baseboard Piping 2 ft. Section
        Prices start at : 80.28 USD / each

        It goes around the pipe and is held in place with a custom clamp. Replace missing fins and increase boiler efficiency. Fin Clamp Baseboard Element is a multi-fin "Hinged" hydronic heating element that can be attached to existing hot water or steam pipes.
        •  Eliminates cold spots
        •  More durable than standard fin tube because it is made with heavier gauge metal
        •  3 in. fin will produce 1665 BTU's per linear foot of active element

        3

          • Returnable: 90-Day
          • Product Depth (in.): 3
          • Product Height (in.): 3
          United States
          Hawaii
          Packard 440-Volt 50/5 MFD Dual Rated Motor Run Round Capacitor
          Prices start at : 15.64 USD / box

          For heavy duty continuous applications such as furnace blower motor and condenser fan motors. Dual rated motor run capacitor 50/5 MFD, 440 Voltage, round. Capacitors can hold a charge for long periods of time.
          •  Metal case
          •  Non PCB oil
          • Manufacturer Warranty: 1 Year
          • Brand/Model Compatibility: Universal - replaces many OEM capacitors
          • Product Weight (lb.): 0.75lb
          • Product Width (in.): 2.5
          United States
          Hawaii
          A/C Security Cage Topbar
          Prices start at : 16.49 USD / each

          Depending on the size the cage is adjusted to, the customer can use more than one. This adjustable security bar can be added anywhere on the cage. Whatever the customer feels secure with determines how many bars they would use.
          •  Steel is powder coated for longevity
          •  Topbar adjust from 30 in. to 51 in. width
          •  Constructed of 16 gauge steel
          •  Screws are self tapping
          • Product Height (in.): 1
          • Brand/Model Compatibility: THIS UNIT IS UNCOMPARABLE TO ANY OTHER IN THE MARKET DUE TO ITS VERSATILIY
          United States
          Hawaii
          Protector Relay
          Prices start at : 115.00 USD / each

          Manual trip safety switch lever and lockout indicator light is on the terminal strip which indicates system lockout. The Honeywell Protector Relay provides intermittent ignition oil primary controls to operate the oil burner, oil valve (if desired) and...
          •  Enclosed safety switch with external reset button, safety switch must be manually reset after safety shutdown
          •  Mounts on standard 4 in. x 4 in. junction box; select models may be mounted directly on burner housing
          •  Temperature range of -40 - 130°F
          • HVAC application: Heating
          • Manufacturer Warranty: 1 year limited warranty
          • Product Height (in.): 4.5
          United States
          Hawaii
          FlexVent 3 in. x 25 ft. MC Non-Insulated
          Prices start at : 121.41 USD / case

          Use this non-insulated and economically priced flexible connector in medium to low pressure A/C systems and in air venting and drying applications. The corrosion resistant spring steel wire helix is laminated with multiple layers of clear and metalized...
          •  Easily shaped to fit over all inlets and quickly connects to fast fittings
          •  Meets UL 181 and NFPA 90A-90B fire codes
          • Color: Silver
          • Product Depth (in.): 16.5
          • Product Length (in.): 25
          • Product Width (in.): 9.5
          United States
          Hawaii
          VENTS 174 CFM Power 4 in. In-Line Centrifugal Metal Duct Vent Fan
          Prices start at : 122.47 USD / each

          The quiet and efficient backward curved impeller is capable of operating in high pressure systems. VENTS VKM 100 inline centrifugal duct fan is designed for residential and commercial ventilation applications.
          •  Quiet and efficient, vibration free operation
          •  ETL certification ensures you of product quality and safety
          •  Ideal for long duct runs
          • Thermostat Controlled: No
          • HVAC application: Ventilation
          • Product Depth (in.): 10.75
          United States
          Hawaii
          15 in. Vent Extension for Direct-Vent Gravity Wall Furnaces
          Prices start at : 84.00 USD / each

          Does not include outside cap. Use Williams' 15 in. Vent tubes only. Vent Extension to meet your installation needs, this vent extension is designed to accommodate venting through a wall up to 15 in.

          9.5

            •  Includes flue extension tube, air inlet tube and air inlet shield
            •  For up to 15 in. wall thickness
            •  Galvanized metal
            • Product Height (in.): 9.5
            • Product Width (in.): 9.5
            • Returnable: 90-Day
            United States
            Hawaii
            Inductor 8 in. Corded In-Line Duct Fan
            Prices start at : 47.4 USD / each

            Corded In-Line Duct Fan is engineered to overcome back pressure and boost air in forced air heating and cooling systems without upsetting the balance in the closed loop system. The Inductor 8 in.
            •  Engineered polycarbonate blade to minimize noise and vibration
            •  Corrosion-resistant galvanized metal
            •  Installs in any position

            8

              • Product Height (in.): 8
              • Manufacturer Warranty: 12 Month Limited Warranty
              • Product Depth (in.): 8
              United States
              Hawaii
              Aftermarket Replacement Inducer Blower for Intercity
              Prices start at : 156.57 USD / each

              Thermally protected and meets all requirements. Drop in replacement equivalent to Fasco A179. UL recognized; CSA or ULc certified. 1/60 HP, Shaded Pole, 115-Volts, 3300 RPM, 1 Speed, 0.9 Amp, CW Rotation, Sleeve Bearing.
              •  Silicone included
              •  Rotation: CW
              •  OEM replacement for ICP ICP/1006168P, ICP/7021-8693..Fasco A179, Fasco 7021-8693
              • Product Depth (in.): 8
              • Product Width (in.): 7
              • Returnable: 90-Day
              United States
              Hawaii