Goat Sheep Milking Milking Equipment For Sale In Maryland

Plastic Milk Bend is a full-flow plastic elbow which is useful to connect the inflation and milk tubing in goat and sheep milking claw set-ups.

The ITP207 Assembly for goats includes 0/300 silicone liners, shells, splitters, bracket and tubing for a ready-made goat milking assembly. The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum...

Easy to inspect for cleaning and maintenance. Valves close automatically if the cluster is kicked off. The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum supply to each liner during both...

For sheep milking, the 2030018 Alignment Accessory is recommended. The bowl is ergonomically designed for quick and comfortable positioning of the claw under the udder. The Vanguard is made out of clear polycarbonate for light weight and ease of visual...

The inside of the ITP206 has been designed to allow milk to rotate and pass through smoothly which reduces foaming and prevents build-up of deposits thus making cleaning and maintenance easier.

Clear Shell fits the 0/584 D/L SI00-style silicone sheep inflation.

For use with 277 heavy-duty clear shells. Soft, translucent, flexible and long-lasting silicone sheep liner last up to four times as long as rubber liners.

This Jetter Cup is a perfect fit for washing the 0/524 Sheep Inflation in clean-in-place washing systems.

Traditional rubber liners for sheep are designed to fit 2200/303 clear shells.

The syringe contains 2 doses and provides a quick and easy solution to getting newborns up and nursing as soon as possible. Give as soon after birth as possible. A high quality colostrum supplement, plus an effective appetite stimulator containing special...

Made of 2" wide poly webbing with nickel plated hardware. Nylon strap between legs is a fixed 3 1/2" length. Lightweight hobbles with Velcro leg cuff adjustments.

Clear Shell to fit 0/524 Silicone Liner.

Number "2" on schematic diagram. Clear Shell for use with 0/301 and 0/386 sheep liners.

The ITP205 Assembly for sheep includes two claws, 0/386 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

Of 9/16" ID Clear Milker Tubing and 7 ft. Milk flows smoothly through the large oval bowl and vacuum problems are minimized. Of ¼" ID Black Vacuum Tubing. Order Bucket & Lid Assembly separately.

The Vanguard Milking Claw Assembly includes two 0/524 silicone liners, two 2200/3209 plastic shells, silicone milk tubing and clear air tubing for a ready-made sheep milking assembly.

Plan to split the mixed solution into 2-3 feedings over the first 24 hours of life. Of warm water (110°-120°F). Of body weight) into 7 oz. Lamb & Kid Colostrum Replacer should be fed to newborn lambs and kids for the first 24 hours of life, but lambs...

Of Vacuum Tubing. Order Milking Cluster separately. Included in the assembly are 40 lb. Extra high density semi-transparent seamless poly milk bucket has rounded shoulders and strong reinforced bottom.

Inject 1 full syringe into each infected quarter immediately after milking and repeat in 12 hours. Use Today at the first signs of bovine mastitis, including inflammation or alteration in milk produced.

Assembly includes unvented Vanguard Claw with shut-off, silicone milk tubing, clear milk bend, clear air tubing, two 281 clear silicone liners and two heavy duty 277 plastic shells.

Each pouch contains 6 individual 2 ounce foil packets of instantized powder. Made in the USA of pure bovine colostrum and fortified with essential vitamins and trace minerals, including key antioxidants.

The accessory clips the air and milking tubes together to better balance the weight of the Vanguard underneath the udder. Alignment accessory is recommended for use with the Vanguard Milking Claw in particular when milking sheep.

The ITP207 Assembly for sheep includes 0/386 rubber liners, shells, splitters, bracket and tubing for a ready-made sheep milking assembly. The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum...

Silicone Liner with extended milk tube for sheep.

2.5" Blue Plastic Milk Valve features a 5/8" inlet.

12"x15" filter strips are sold in a case of 10 boxes with 100 filters per box.

Original equipment kit. External Seal Kit for LC Thomsen Model #4 Milk Pump includes head O-ring, 2 impeller clips, ceramic seal and rotary seal assembly.