Contact seller for estimate Can also be used to drive other hydraulic equipment, 4473 hours, strong running diesel. 2004 Case 4391TA Hydraulic Power System designed for driving a water pump head.
Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Delivery available Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Hours 687 Pyro Alarm and Auto Shut Down Rockford PTO unit...
Needed for pumping mixture of water, leaves and sand from pond. Gas Powered Trash pump with 2 inch inlet and 2 inch oulet. Gas Powered Trash pump 2 inch inlet and oulet. Either centrifical pump or a \"mudsucker\" type flapper pump.
Must be in good condition and able to maintain use for extended period of time. Will be used in a quarry for dewatering. Needed in New York State a heavy duty diesel trash pump capacity of 1300 GPM or larger
Must be smaller than 6\\" preferably no smaller than 3\\" the more horse power the better. Please help us help those in need. Tornados, fires, landslides and floods. For more info on this first response team, please visit and please visit the news article...
Call Elizabeth Lee I will pay for shipping, and give you cash. Do you have unwanted, used/junk diesel engine, 125 HP, once used for ag well? Gear head optional.
Thank you, Mario Lefebvre Hello, We are looking for a used diesel skid-mounted trash pump, with a capacity of 10\" @ over 2,000 gpm, 25 psi with a suction lift of 20'. Please advise if you have this equipment available.
Barnes 4\"Self Priming Centrifigal Trash Pump (trailer mounted) 28 foot suction pipe and strainer included 70 foot layflat discharge hose included quick disconect on suction and discharge Engine: Ford D172 gasoline, 58.5 hp at 2000 RPM Cast iron...
Thompson Pump sells and rents their entire line of dewatering pumps as well as bypass systems, wellpoint systems and a complete line of pumping accessories. Thompson Pump sells and rents an entire line of portable dewatering pumps as well as bypass systems,...
Skid has built-in fuel tank(not sure about capacity,50 gals ?). Pump was used for temporary dewatering of large detention pond. 6\"x 8\" skid mounted trash pump, 4-71 Detroit w/ Mission pumpbody.
The pump is easy to set up and has an adjustable water flow control that can achieve fountain heights up to 4.1 ft. Our 170 GPH Low Water Shut-Off Fountain Pump is the ideal pump for medium to medium-large fountains that sometimes run low on water.
✓ Compatible with 1/2 in. ID tubing
✓ Patented low water shut-off feature
✓ We recommend its use in fresh water temperatures ranging from 41 to 86 degrees Fahrenheit.
Tubing and comes with a 6 ft. The Aquarius Universal 80 pump is ideal for small bubbling stones, statuary and decorative fountains. Compact design allows for the pump to be placed in small areas and will operate in as little as 1/2 in.
Alpine's Eco-Twist is an energy efficient pump, touting a 70% reduction in power consumption compared to the standard pump. This pump may be used horizontally or vertically and includes rotational adapters to allow flexibility in any water feature.
Product Width (in.): 5
Manufacturer Warranty: 1 Year
Adjustable Valve: Yes
Maximum Flow (gallons per hour): 3000
Horsepower (hp): 0.320
Certifications and Listings: No Certifications or Listings
This submersible pump comes with a filter for easy installation. And a maximum flow of 1,800 GPH. This pump has a maximum capacity of 1,875 gal. This waterfall pump has a maximum lift of 195-39/64 in.
Indoor/Outdoor: Outdoor
Commercial/Residential Use: Residential
Submersible pump for convenient outdoor use in waterfalls: Yes
The water cooling and oil free motor design is safe to use around. It can create streams, waterfalls or fountains in your garden pond. This heavy-duty corrosion resistant stainless steel submersible waterfall pump provides long life in rough environments.
Built-in automatic reset thermal overload protector prevents motor over heat: Yes
Alpine's Eco-Twist is an energy efficient pump, touting a 70% reduction in power consumption compared to the standard pump. This pump may be used horizontally or vertically and includes rotational adapters to allow flexibility in any water feature.
Product Depth (in.): 13
Certifications and Listings: No Certifications or Listings
This outdoor pond pump has a maximum lift of 154-51/64 in. This submersible pond pump requires a 115-Volt power supply and 1/2 in. And a maximum flow of 800 GPH. Diameter tubing (tubing not included).
Features state of the art engineering designed to circulate more water in less time using less energy creating less noise. When installed, operated and maintained in accordance with the instructions, your pump will provide years of service.
✓ Single piece corrosion resistant strainer pot and volute
✓ Funnel flo diffuser for quiet operation
Product Depth (in.): 30
Certifications and Listings: 1-UL Listed,CSA Listed,NSF Listed
Manufacturer Warranty: 1 year warranty on the motor only
Easy to install and maintain, magnetic-drive pumps are ideal for a variety of applications. Designed to operate continuously with minimal energy consumption, magnetic-drive pumps or a corrosion resistant body specifically for submersible use.
This pump is very easy for the end user to service, containing modular parts and also includes flow controls in the model 200-6000 pumps. The new design allows for less energy consumption while providing excellent steady flow and minimizes heat production...
✓ Pre-filter grill with flow control valve in submersible applications
✓ Adjustable Valve
✓ ECO-SAV generates more power with less energy consumption
This Beckett 0.005 HP Submersible Fountain Pump is excellent for use with both indoor and outdoor fountains. Its rotating outlet pipe provides a convenient connection for 3/8 in. It efficiently pumps 40 GPH at a height of 1 ft.
Certifications and Listings: 1-UL Listed
Product Weight (lb.): .58lb
Ideal for use with indoor and outdoor fountains: Yes
This pump is recommended for a small waterfall up to 5 ft. This energy efficient pump offers a 1,200 GPH maximum flow and features quiet technology to help limit sound disturbances, so you can enjoy your pond.
✓ Pumps 1,200 GPH for powerful operation
✓ Compatible with 1-1/2 and 2 in. ID tubing
✓ We recommend its use in fresh water temperatures ranging from 41oeF to 86oeF.
✓ Energy-efficient for economical use
✓ TotalPond pumps are not recommended for use in heavily chlorinated water or water with high pH levels.
Power cord for convenience. The pump is designed for continuous use, features wet rotor technology and can pump up to 130 GPH at 1 ft. The pump includes adjustable flow control and a 6 ft.
✓ Lift capability of up to 4 ft.
✓ Designed for most indoor and outdoor fountains and other general water pump uses