Gardening Supplies Ph, Ec Amp Tds For Sale In Canada

Features an easy-to-read LCD screen, a hold function that saves measurements for convenient reading/ recording, a built-in thermometer and a carrying case with belt clip. Specifications: • Range: 0 – 9990 ppm (mg/L) • Temp.

Includes a graphite conductivity electrode, which provides greater accuracy because it resists contamination by salt deposits in the sample. At start-up, the tester performs a self check then displays the remaining battery level to assure proper working...

Easy to use, simply place the probes into your solution and the selected reading is displayed on screen. Better harvests start with the Bluelab Combo Meter! This handy and accurate little unit is a conductivity, pH and temperature monitor all in one.

However, some important exceptions do exist. Hydroponic nutrients are typically acidic and, when mixed in tap water, usually drop the solution into the proper range. To maximize plant growth, the pH of your nutrients should be slightly acidic.

Advanced Nutrients pH products are carefully-manufactured from pure concentrates that are pharmaceutical grade. Use small increments when adjusting the nutrient solution to lower the pH levels as required.

Pop in a HANNA Replacement Electrode, and you'll be back in business! Compatible with: • HI 98129 and HI 98130 Combo multi-parameter testers • HI 98127 and HI 98128 pHep testers • HI 98121 ORP tester (measures dissolved oxygen) Grower's Tip: Hanna...

Simply fill a test-tube halfway with nutrient, add a few drops of pH Test Indicator (1 oz), and observe the coloration of the liquid in the test vial. Many experienced growers prefer this pH Test Kit to expensive electronic meters because of its reliability...

Simply pull out 1-2 mm (1/8-inch) of the junction fiber to completely renew the junction. For this purpose, always keep the tissue inside of the protective cap wet. A simple, inexpensive solution to accurate testing! The Champ is a HANNA pH Tester that...

The handheld HI 98127 includes a sensor/ electrode, probe removal tool, batteries and complete instructions. 2.) After testing aggressive chemicals. 3.) Where high accuracy is required.

Use to maximize plant nutrition and ensure optimum plant health, growth and yields. Features: • Successful calibration indicator • Measures pH and temperature • Completely waterproof • Backlit LCD display • AAA alkaline battery included •...

Easy to use, just install over your nutrient reservoir for continuous measurement. Warranty: 2-years (six months on electrode). Features: • Compact and easy to install • Waterproof • Measures both pH and TDS with a single instrument • Advanced...

The probe, built for horticulture and hydroponics applications, compensates for temperature variations automatically, is very stable and requires little maintenance. Easy to use, just hang the GroChek TDS Monitor above the sample to be monitored or take...

Features a large, easy-to-read LCD and automatic temperature compensation to ensure your readings are consistent to the standard or reference temperature. Instruction Manual (PDF) Easy to operate, just press the button on top of the meter once and it's...

Features: • ‘Plant Safe' green LED display • Selectable values for conductivity and temperature • Simple push button pH calibration • No calibration required for conductivity and temperature • Silent alarm for both high and low settings •...

Features: • EC (0.2 – 3.6), CF (2 – 36) and ppm scales (TDS and 700 scale) • Fully waterproof • Auto sense on and off • Battery life minimum 1 year (or shelf life of battery) • 5-Year Manufacturer's Warranty Size: 16″ (40.7cm) long Instruction...

The HANNA pH EC TDS Meter continuously monitors the three most crucial nutrient parameters in hydroponic, greenhouse and horticultural applications. Instruction Manual (PDF) Grower's Tip: To prolong the life of the electrode, we recommend washing it monthly...

This pH Electrode is gel filled making it maintenance free! Best of all, it's designed for use with ALL Bluelab pens, meters and monitors. Features: • Fully waterproof, submersible to 10 meters • Quality BNC connection • Tough polypropylene barrel...

If you have a pH that's too high or too low, your crops cannot uptake nutrients and may well be damaged or even killed. For best results check pH levels daily. Product Label (PDF) Ingredients: Phosphoric acid.

Earth Juice Natural Up can be used to adjust fertilizer and foliar spray solution for a much more effective use and faster absorption of nutrients by plants. Optimal pH range for fertilizer/ nutrient solution for most plant and turf is 5.5 – 6.5. Will...

Experienced growers consider the ideal pH for most crops to fall between 5.5 and 6.5. Users of General Hydroponics nutrient products generally do not experience problems maintaining the proper pH range because our formulas are pH buffered.

Includes an easy to read LCD and an automatic shut-off. The HI 98129 features a replaceable electrode as well as an EC/TDS graphite electrode, which resists contamination by salts and other substances.

The HI 981401N ships complete with with an electrode, stainless steel grounding bar, buffer solution sachets, a calibration screwdriver, 12-volt adapter and instructions. Also, To prolong the electrode life, after switching the meter off, remove the electrode...

Two-point calibration is simple to perform. The connector must remain clean and dry. The HANNA Checker Digital pH Meter is fitted with a long and sturdy electrode that supplies fast and accurate readings from 0 to 14.

Lower pH with these all natural pH adjusting crystals. DIRECTIONS FOR USE: Mix solution thoroughly and adjust pH prior to application. Natural pH Down will “soften” hard water, increasing the effectiveness of insecticides and herbicides, too! Available...

A must have in every grower's toolbox! Bluelab Calibration Solution is used to ensure that your testing equipment is working properly and giving accurate readings. Discard when finished — do NOT reuse.

Available in 20 ml packets that are always fresh and easy-to-use. While the meter is waiting for the reading to stabilize a clock symbol or hour glass symbol will flash. Once the meter has reached a stable reading it will automatically calibrate itself.

Available separately in 500 ml bottles. Step 3: Rinse the electrode under tap water (or deionized water) and then place the electrode into the pH 4 (HI 7004). Step 2: ALL HANNA meters will need to be calibrated to pH 7 (HI 7007) first.