Fonterra Milk Cooling Regulations

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then...

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to...

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then...

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "353-06" on schematic diagram.

Part number "348-36" on schematic diagram.

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Regulator has two washable replaceable filters. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed...

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to...

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

DOS and WindowsA software isA included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then...

Safety Valve for Stabilvac Seperate styles.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended.

Part number "348-35" on schematic diagram.

This is the Spanish-language version with instructions, labels and readout in Spanish. DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs,...

Dual scale, Hg and KPA. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Glycerine fill assures accuracy by providing a cushion against vibration.

Dual scale, Hg and KPA. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Glycerine fill assures accuracy by providing a cushion against vibration.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.