Fencing Systems Livestock Supplies For Sale In Kentucky

Simply place wire inside splice and crimp using the Crimp 'N Cut Spice-It Tool. Crimp 'N Cut Spice-It Tool sold separately. Package of 100. Splices stay tight even with temperature changes.

Allows for one-man fence building. Model 415 has a new-patented 3rd hook design, which allows for longer pulls without re-setting stretcher.

Holds tape tight and allows for easy retightening. Begin and end each strand with this tensioner/insulator at gate posts or buildings.

The lightweight portable corral sets up easily in about 10 minutes. All-weather HDPE resin will not crack, chip, peel or rust. The Carri-Lite horse corral has been engineered to provide years of maintenance-free service.

3/4" stainless steel screws for Safe-Fence R-16 Insulators.

3) Align the second leg of the splice, using the color crossover mark as the center, and begin twisting it into the first leg of the splice. TwistSplices for 12.5 ga smooth wire are very quick and handy to tie off hi-tensile wire.

Use with Jakes Wire Tighteners for tensioning wire.

Featured video, click image to play.

10 1/4" end to end, 4 3/4" top to bottom, 1/2" rod. Convenient gate latch features black, wrought iron finish.

Use at all corners or any up and down hill direction change of 10º or greater.

Ideal for all perimeter fences. Can be hand-knotted or crimped. Class 3 galvanized, 180 KSI wire. The standard for both electric and non-electric fences.

Made in the USA. Simply run the nylon end thru the loop-hole, clamp down teeth and you're done. Closing a gate has never been so easy! 1” single layer of nylon with a durable tooth type clip end.

To attach rod or pipe fencing to post.

Can be used anywhere you can drive a T-post. Contents: Contents of this package will build 4 light duty end braces, or 2 light duty corner braces, or, 2 heavy duty end braces or 1 heavy duty corner brace.

Stainless steel buckle similar to the tensioner, used to join rolls of tape or repair torn or broken tape.

Easy to install and stays in place. Large designed for 4-8" posts. For smooth and barbed wire. Ideal for electric fence repair or construction. Solution for terminating wire fencing to T-Post and post fencing systems.

Made of hardened steel with rust-resistant finish and ergonomic handles with black insulated grips.

Fits standard pipe fence from 1-5/8" to 1-7/8". The clamp fastens together with two carriage bolts and nuts, providing safe, easy use and a corner that stays put without extra posts, welds or wire wrapping.

Fits Ring Top Post (#40990). Claw style insulator ideal for use in temporary electric fencing with rod posts 3/16" - 3/8" diameter.

May also be used to terminate the rope at the end of the strand. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. Connect a fence energizer to 1/4” electric rope or braid.

Large designed for 4-8" posts. For smooth and barbed wire. Easy to install and stays in place. Ideal for electric fence repair or construction. Cuts installation time in half. Solution for terminating wire fencing to T-Post and post fencing systems.

Heavy duty plastic. Designed so it can be hung from a permanent fence wire or bolted to a post. Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard.

The built-in clips are set at the following heights (measured from the top of the step-in flange): 5.00”, 9.50”, 12.50”, 17.45”, 21.45”, 26.75”, 30.10”, 35.25” (highest fence height) Specifications:

Made from 1/4” spring steel. Helps absorb expansion and contraction of the fence wire. Spring is 1 1/2” diameter, expands from 9” to 18”. One inch of compression equals 150 lbs of tension.

1 1/2" Tape Clip, designed specifically for equine electric fence tape to be securely attached to a Gallagher Insulated Line Post.

-Wildlife Mode pulses fast day and night -Full Power Mode pulses fast during the day and slower at night, conserving power when animals are less active. Ideal for managed rotational grazing and great selection for wildlife.

3000 volts @ 500 ohms. 10,000 volts open line. Ensures maximum power transmission for a constantly strong charge. This unit features an integrated 110-volt battery charging port and includes the power supply adapter.