Fence Accessories Livestock Supplies For Sale In Vancouver

Absorbs up to 34 watts of transient power. Helps protect your 110-volt plug in energizer from power surges caused by lightning strikes. Plugs into any 110 volt outlet, limits high voltage spikes to 350 volts.

One 49' roll is adequate for connection of two standard gates. Highly conductive 12-gauge aluminum wire insulated with heavy polyethylene coating for up to 20,000 volts. Ideal for all underground applications.

Featured video, click image to play.

A significant change in current ampere readings between one point and the next indicates the presence of a fault between these two points. 1-year warranty. Hand-held unit allows you to quickly move down your fence line, comparing voltage and current readings...

Protect your valuable horses and livestock from serious injury and unsightly scrapes. Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops.

Connecting gates to a single post.

Hardware not included. Install at convenient locations like fence corners and gates to switch off a section of fence for maintenance and routine checks. Stainless steel contacts.

Attach to fences near roadways, driveways, buildings, etc., anywhere fence is passed or seen during hours of darkness. When voltage drops, fence alert flashes to notify you of problems.

Designed so it can be hung from a permanent fence wire or bolted to a post. Heavy duty plastic. Wind up or pay out your electric fence in minutes. Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard.

May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire.

One-inch shaft turns on greased bushing for smooth operation and long life. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control. Has adjustable drag to prevent free wheeling of coil.

For your easy convenience to splice fence.

For use with all fence energizers. Reads from 1,000-10,000 volts; lights glow in sequence to indicate approximate voltage. Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price.

A multi-purpose, high conductive connector that can be used with lead wire to provide a connection from the fencer to your fence or for connecting multiple strand fences together; also a great way to splice ½” poly tape.

For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately.

Uses very little voltage off of fence when Knocker spark gap is adjusted correctly*. 360 degrees and from the air as well. The Knocker body also gives off a knocking sound that lets you know that all is OK when you cannot see the light.

Helps absorb expansion and contraction of the fence wire. Made from 1/4” spring steel. Spring is 1 1/2” diameter, expands from 9” to 18”. Fence compression spring is used to determine wire tension on your fence line.

Bolt measures 6” (measured from the 90 degree angle to the point of bolt.) Used with Hot Rope or polywire to turn corners or as an end insulator.

Works so much better than the solid shank ones. Like how it holds up the gate.