Acceptable for all types of electric fence material. 2 alligator clamps joined by 32” of shielded wire. Connects and transfers power from 1 strand to another.
May also be used to terminate the rope at the end of the strand. Connect a fence energizer to 1/4” electric rope or braid. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire.
Contracts to 32” when open and includes the unique Safe-Fence tensioners with special gate hood plates to attach the spring and handle to any type of electric fence system. 24' spring gate is excellent for electrically bridging wide gate openings.
Activated when fence pulse is detected Switch to change between DVM and Current Meter modes Retractable voltage probe for reading voltage on energizers and other hard to reach areas Micro-chip technology that enables low voltage operation Detachable ground...
Recommended for high tensile wire use (usually 12.5 gauge wire). In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding.
Has an in-line length adjustor for gates from 8 ft. Electri-Gate is a high conductive stretchable cord with a high impact plastic handle. Comes complete with two 2-way gate anchors.
Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard. Wind up or pay out your electric fence in minutes. Heavy duty plastic. Designed so it can be hung from a permanent fence wire or bolted to a post.
A multi-purpose, high conductive connector that can be used with lead wire to provide a connection from the fencer to your fence or for connecting multiple strand fences together; also a great way to splice ½” poly tape.
For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately.
Convenient to use when more than one wire is required to hold stock. Ideal for use in temporary electric fencing with round posts from 1/4" to 5/8" diameter.
One-inch shaft turns on greased bushing for smooth operation and long life. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control. Has adjustable drag to prevent free wheeling of coil.
✓ The tensioners swivel back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes
✓ Attachment hole to connect fence charger wire or underground burial wire
✓ Shipping Dimensions: Approximately 6.62 x 2.74 x 1.71 inches.
✓ The stainless-steel triangular tensioner holds the polytape tight, deters tearing from impact, and allows easy retightening if the polytape becomes loose
