Fence Accessories Livestock Supplies For Sale In Huntsville

Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. Connect a fence energizer to 1/4” electric rope or braid. May also be used to terminate the rope at the end of the strand.

Used for adjusting wire tension with the wire strainers.

Used with Hot Rope or polywire to turn corners or as an end insulator. Bolt measures 6” (measured from the 90 degree angle to the point of bolt.)

To be used with fencing model numbers DF-SP-LI (27127) and MAG12SP (27128). Easily secure your fencing unit to a t-post with the help of this mounting bracket.

Ideal to use with the Geared Medium Reel (#42522). Provides flexibility to liven the fence from either the reel or handle end.

One inch of compression equals 150 lbs of tension. Helps absorb expansion and contraction of the fence wire. Spring is 1 1/2” diameter, expands from 9” to 18”. Fence compression spring is used to determine wire tension on your fence line.

Stainless steel contacts. Install at convenient locations like fence corners and gates to switch off a section of fence for maintenance and routine checks. Hardware not included.

Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions. Complete ground rod kit to get the most from your electric fence system.

This powder-coated, white, aluminum tightener is best for use with rope or light-gauge wire. Not for use with coated wire. This tightener is installed without having to disconnect the end of the fence.

Recommended for high tensile wire use (usually 12.5 gauge wire). In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding.

Hand-held unit allows you to quickly move down your fence line, comparing voltage and current readings as you go, to locate short circuits and faults on your fence. A significant change in current ampere readings between one point and the next indicates...

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

Ground rod clamp connects grounding wire to the ground rod.

Clamp around your standard t-post and tighten. For smooth wire or polywire use only.

A multi-purpose, high conductive connector that can be used with lead wire to provide a connection from the fencer to your fence or for connecting multiple strand fences together; also a great way to splice ½” poly tape.

Appropriate for use with 1/8" and 1/4" electric rope. A quick, convenient way to splice Hot Rope for a better, stronger splice.

The stainless steel K-Clips instantly attaches to existing wire fences for geater visibility. These bright white 3" x 5" plastic markers give you a safer, more visible fence, even at night.

Nylon snap-on clip insulators for use with the Insulated Line Post.

Easy installation: place spike in the ground and clip to fence. The Live Fence Indicator is an early warning device tells you in a flash that your electric fence is live. Watch video to learn how to install the Gallagher Live Fence Indicator:

Cords are 46" long and clamps are 3". Made with heavy-duty alligator clamps and double-shielded, high-voltage wire for leak-proof transfer of power from the energizer to the fence and ground rods.