Fence Accessories Livestock Supplies For Sale In Columbus

10-year warranty. Integrated joint clamp allows direct attachment of wires for paralleling and power connection. The Insulated End Strainer is a heavy duty, all-in-one, corrosion-resistant assembly to insulate, and tighten up to 4 mm/15 gauge fence wire.

Used with Hot Rope or polywire to turn corners or as an end insulator. Bolt measures 6” (measured from the 90 degree angle to the point of bolt.)

1 1/2" Tape Clip, designed specifically for equine electric fence tape to be securely attached to a Gallagher Insulated Line Post.

Connect and transfer power from 1 strand of 1/4” electric rope or braid to another. May be used to terminate the rope at the end of the fence. Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire.

For use with all fence energizers. Reads from 1,000-10,000 volts; lights glow in sequence to indicate approximate voltage. Enables you to test the "control factor" of your system and assist you in fault finding, at a very reasonable price.

Aluminum connector with wire to connect polytape or polywire to your electric fence charger.

Recommended for high tensile wire use (usually 12.5 gauge wire). In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding.

Suitable for use with any model or brand of low impedance fence charger that has 1 joule or greater output. When a Storm Guard Module is in use, it can absorb this surge and fail, instead of causing failure to your fence charger.

To be used with fencing model numbers DF-SP-LI (27127) and MAG12SP (27128). Easily secure your fencing unit to a t-post with the help of this mounting bracket.

For your easy convenience to splice fence.

Fence compression spring is used to determine wire tension on your fence line. Helps absorb expansion and contraction of the fence wire. One inch of compression equals 150 lbs of tension.

Used for adjusting wire tension with the wire strainers.

Easy-to-read digital design, reads up to 19.9 kilovolts. For use with low impedance fence chargers. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately.

We've taken everything we love about our Energizers and hit the refresh button. As of January 1st, 2018, all Gallagher energizers come with a 3-year manufacturer warranty. Extended mileage with the same unbeatable quality at a competitive price.

The Live Fence Indicator is an early warning device tells you in a flash that your electric fence is live. Watch video to learn how to install the Gallagher Live Fence Indicator: Easy installation: place spike in the ground and clip to fence.

Specifications Model MAG-12-SP Warranty 2 years Range 30 miles Joules Low 1.1 Joules High 3.1+ Power Source 12V Solar/Battery Fence Voltage - Open Circuit 13,500 Fence Voltage - 500 ohm 6,100 Fence Voltage - 100 ohm 3,100 Note:

Plated with heavy zinc to prevent rust. Add a padlock for theft deterrence (not included). Easily secure your fencing unit to a T-post with this mounting bracket. To be used with ParMak Solar-Pak 6 (P2-P1) or Solar-Pak 12 (P2-P8).

Wide flange prevents arcing & shorts. For high-tensile wire on wood posts. Use code (Z1FB) for a FREE Dare High Tensile System Fence Booklet. Made of black high-density polyethylene to withstand climate.

Connecting gates to a single post.