Fence Accessories Electric Fencing For Sale In United States

Works with all types of fence wire. Easy to use by simply touching tester to fence wire. The Zareba Systems Eight-Light Voltage Tester measures fence line voltage. Easy to operate.

Power Patrol Electric Fence Battery 6 Volt is for Gallagher electric fence model A670. It is a sealed lead acid (AGM) termination .187 in.

Zareba Inline Cut Off Switch is a convenient way to cut power to an electric fence at various locations along the fence. It is also useful to track down shorts.

Gallagher Pro 3-Way Gate Anchor 2 Pack. Robust insulator; screws or nails directly into wooden posts. All edges rounded to prevent stock damage.

Gallagher Electric Bungy Gate is a pre-assembled gate-bungy cord that stretched to twice its length (from 11-1/2 to 23 in.)and is ideal for on/off laneways. The handy three-Way Gate Anchor allows for additional, secure gate connections.

Eagle Picher Electric Fence Battery 4 Volt is for Zarebra electric fence models SP-8904, SP-44, SP-504, SP-904 and SP-4404. It is a sealed lead acid (AGM) termination .187 in.

Power Patrol Electric Fence Battery 6 Volt is for Zarebra electric fence models SP3, LIS3 and SB3ZB. It is a sealed lead acid (AGM) termination .187 in.

Use this pair of Zareba Systems battery clips to attach lead-out wire from fence controller to battery.

Large read out. Battery included. Provides a digital read-out of voltage on the fence line, up to 9,900 volts (9.9 kv). The Zareba Systems Digital Electric Fence Tester is a valuable tool for monitoring electric fence system performance.

Nylon snap-on clip insulators for use with the Insulated Line Post.

Connecting gates to a single post.

Protect your valuable horses and livestock from serious injury and unsightly scrapes. Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops.

Ideal for use in temporary electric fencing with round posts from 1/4" to 5/8" diameter. Convenient to use when more than one wire is required to hold stock.

Stainless steel clips for use with 3/8" or 1/2" fiberglass posts. Pig tail clips may be used instead of insulators.

New improved design has numerous adjustments to keep Hi-Tensile wire coil under control. Has adjustable drag to prevent free wheeling of coil. One-inch shaft turns on greased bushing for smooth operation and long life.

24' spring gate is excellent for electrically bridging wide gate openings. Contracts to 32” when open and includes the unique Safe-Fence tensioners with special gate hood plates to attach the spring and handle to any type of electric fence system.

Connects to an end tensioner to open gate.

Energized with any electric fencer. Metal never touches the tractor or vehicle, as it is covered by the fiberglass/polyethylene. Holds cattle, hogs, sheep and horses like an electric fence.

Wind up or pay out your electric fence in minutes. Heavy duty plastic. Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard. Designed so it can be hung from a permanent fence wire or bolted to a post.

Complete ground rod kit to get the most from your electric fence system. Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions.

Premium gate handle with comfortable rubber grip and unique internal overstretch protection. The half spring, springload internal mechanism will not allow you to over stretch.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

The only external fuse protection for fence chargers in the world. Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go.

A quick, convenient way to splice Hot Rope for a better, stronger splice. Appropriate for use with 1/8" and 1/4" electric rope.

1 1/2" Tape Clip, designed specifically for equine electric fence tape to be securely attached to a Gallagher Insulated Line Post.

One inch of compression equals 150 lbs of tension. Helps absorb expansion and contraction of the fence wire. Made from 1/4” spring steel. Fence compression spring is used to determine wire tension on your fence line.

Easy-to-read digital design, reads up to 19.9 kilovolts. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. For use with low impedance fence chargers.