Farm Implements Farm Livestock For Sale In Syracuse

★★★★★

Prices start at : 549.99 USD

Could have been packaged better for shipping. Three spreading patterns ensure thorough, consistent coverage. Overall, nice design. If it needs spreading, the King Kutter Steel Seeder/Spreader will get the job done.

✓ Hopper can hold up to 900 lb of fertilizer
✓ Model # S-500-UK
✓ Seamless steel hopper is strong enough to endure rough handling and heavy use
✓ 3 different spreading patterns, including predominantly left, predominantly right, or right and left
✓ Includes rotating agitator and gearbox with shielded drive line
✓ Can spread grass seed, granular fertilizer, crystalline herbicides, pesticides, sand, and salt

New York

Syracuse

72 in Gold Tubular Yard Rake

★★★★★

Prices start at : 449.99 USD

There is no drain hole on this tube so I drilled a hole to drain the water out. A rake has to be tough to grade gravel roads and remove rocks - and the King Kutter Tubular Framed Landscape Rake meets the challenge.

✓ This product cannot be shipped to: CA
✓ 3 in square angle beam tine frame
✓ Shipping Dimensions: Approximately 72 x 42 x 42 inches. (LTL truck)
✓ A rake has to be tough to grade gravel roads and remove rocks, and the King Kutter Tubular Framed Landscape Rake meets the challenge
✓ Weight: Approximately: 325 pounds
✓ Tines individually mounted for durability

New York

Syracuse

Cream Left Hand Rake Wheel

Prices start at : 115.99 USD

✓ Weight: Approximately: 48 pounds
✓ This product cannot be shipped to: CA
✓ Shipping Dimensions: Approximately 55 x 1.5 x 1 inches.
✓ 55 in overall diameter
✓ 0.275 in tine diameter
✓ Fits Case, H&S, M&W, New Holland, Sitrex, Westward, and others

New York

Syracuse

Category 1-2 Lift Arm Reducer Bushing

Prices start at : 2.99 USD

✓ Shipping Dimensions: Approximately 4.75 x 3 x 1 inches.
✓ Two per package
✓ Yellow zinc dichromate plated
✓ Used in the pin hole of a lift arm to allow a smaller category pin to fit
✓ Weight: Approximately: .4 pounds
✓ 1-1/8 in. outside diameter

New York

Syracuse

Cross & Bearing Repair Kit - Series 12

Prices start at : 12.99 USD

✓ Snap ring located in bushing
✓ For repair & maintenance of series 6, 12, 14, 35 drivelines
✓ 2-1/2 in. cap to cap length
✓ Shipping Dimensions: Approximately 3.25 x 3.25 x 1.5 inches.
✓ Made in the USA
✓ 1-1/16 in. bearing cap

New York

Syracuse

Straight Clevis

Prices start at : 10.99 USD

✓ Forged for better strength and conformity
✓ Weight: Approximately: 2.5 to 5.8 pounds depending on selected size
✓ This product cannot be shipped to: CA
✓ Pin is yellow zinc dichromate plated

New York

Syracuse

Twist Lock Pins

Prices start at : 1.29 USD

✓ Shipping Dimensions: Approximately 4.75 x 2 x 1 inches.
✓ Weight: Approximately: .1 pounds
✓ Unique, self-locking design
✓ 1-1/8 in. loop diameter fits on shaft sizes 1/2 in., 9/16 in. & 5/8 in.
✓ This product cannot be shipped to: CA

New York

Syracuse

Cream Right Hand Rake Wheel

Prices start at : 115.99 USD

✓ Shipping Dimensions: Approximately 55 x 1.5 x 1 inches.
✓ Weight: Approximately: 48 pounds
✓ Heavy duty tine
✓ Fits Case, H&S, M&W, New Holland, Sitrex, Westward, and others
✓ Invest in quality with rake wheels from Herschel
✓ 55 in overall diameter

New York

Syracuse

Male Tip - (ISO) Popper (1/2 In. NPTF)

Prices start at : 6.99 USD

✓ Weight: Approximately: 1 pounds
✓ This product cannot be shipped to: CA
✓ Meets ISO 5675 dimensional specifications
✓ Shielded valve eliminates flow checking

New York

Syracuse

Replacement Chisel Point

Prices start at : 10.99 USD

✓ Replacement points for 3-piece moldboard twist assembly
✓ High-carbon, heat-treated steel for long-lasting life
✓ Made in the USA
✓ 1/2 in. CH bolt size
✓ This product cannot be shipped to: CA

New York

Syracuse

Wheel-Type Rake Tooth - OT-1A

Prices start at : 1.95 USD

✓ Shipping Dimensions: Approximately 21 x 12.75 x .29 inches.
✓ Weight: Approximately: .56 pounds
✓ 0.281 (0.77mm) wire
✓ Wheel Rake Tooth fits OTMA, H&S, Sitrex & Atlax wheel rakes
✓ Replaces part #203055

New York

Syracuse

Sickle Section Overlap Section Set - 711-005

Prices start at : 11.99 USD

✓ For New Holland machines with Twin sickle design (bolted only)
✓ Top serrated
✓ Weight: Approximately: 1.2 pounds
✓ Shipping Dimensions: Approximately 9.6 x 4.5 x .8 inches.

New York

Syracuse

Moldboard Shins

Prices start at : 16.99 USD

✓ Shipping Dimensions: Approximately 12 x 6 x 2 inches to 13 x 6 x 2 inches depending on size selected.
✓ Weight: Approximately: 3.4 to 4.94 pounds depending on selected size
✓ This product cannot be shipped to: CA
✓ Made in the USA

New York

Syracuse

Pressure Regulator

★★★★★

Prices start at : 89.99 USD

I was looking for a pressure regulator and was unsure which way to go. I received my pressure regulator and it runs great! I called TIR and spoke directly to them and they helped guide me through what would best work for me.

✓ 3/4 inch NPT in and out
✓ This product cannot be shipped to: CA
✓ Flow rate to 50 GPM
✓ 12 VDC 50 MA draw
✓ Open/close speed 1 RPM

New York

Syracuse

Nylon Repair Kit - Series 6

Prices start at : 12.99 USD

✓ Made in the USA
✓ Weight: Approximately: .24 pounds
✓ This product cannot be shipped to: CA
✓ Mfr. item # 921-0600

New York

Syracuse

Adapter - (ISO) to JD (Old Style)

Prices start at : 17.99 USD

✓ Weight: Approximately: 1 pounds
✓ Shipping Dimensions: Approximately 4.25 x 2.4 x 1.4 inches.
✓ Allows implements with Pioneer ISO tips to connect to older JD tractors
✓ Induction hardened body to prevent brinelling and prolong service life

New York

Syracuse

Bolt-On Fasteners - 904-513

Prices start at : 9.99 USD

✓ Weight: Approximately: .56 pounds
✓ Tighten nut to 75-95 in./lbs.
✓ Assorted sizes
✓ Shipping Dimensions: Approximately 4.32 x 2.62 x 1.3 inches.

New York

Syracuse

Hydraulic Adapter - 10MB x 8FB

Prices start at : 4.59 USD

✓ Converts 1/2 in. female O-ring boss to 5/8 in. female O-ring boss
✓ 5/8 in. male O-ring boss x 1/2 in. female O-ring boss
✓ Use to properly plumb hydraulic system for longer hose service life
✓ Shipping Dimensions: Approximately 4 x 3 x 2 inches.

New York

Syracuse

1/4 in x 1-1/2 in Self-Colored Square Machinery Key - 2 Pk

Prices start at : 1.69 USD

✓ Weight: Approximately: .05 pounds
✓ Commonly used for mechanical applications, securing wheels or pulleys to a spindle
✓ Includes 2 keys
✓ This product cannot be shipped to: CA
✓ Square keys are machine elements used to hold machinery parts in place

New York

Syracuse