Agiseek home

Farm Implements Farm Livestock For Sale In Seattle

Become a Partner
Hydraulic Adapter - 6MJ x 6MP
Prices start at : 2.39 USD

  •  Shipping Dimensions: Approximately 4.5 x 2.75 x 1.75 inches.
  •  Converts female JIC or pipe to a male JIC or pipe thread
  •  3/8 in. male JIC x 3/8 in. male pipe
  •  This product cannot be shipped to: CA
Washington
Seattle
Disc Mower Knife - D31-122
Prices start at : 7.49 USD

  •  Rotates 11 degrees
  •  Counter clockwise rotation
  •  6 pk.
  •  Weight: Approximately: 1.82 pounds
Washington
Seattle
S-Tine Clamp - 1134
Prices start at : 6.19 USD

  •  Made to OEM specifications
  •  2 in. x 2 in.
  •  High quality spring steel with rounded edges
  •  Shipping Dimensions: Approximately 9.1 x 6 x .1 inches.
Washington
Seattle
Hydraulic Adapter - 8MB x 6FP
Prices start at : 2.79 USD

  •  Use to properly plumb hydraulic system for longer service life
  •  Weight: Approximately: .19 pounds
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 4 x 3 x 2 inches.
Washington
Seattle
6 Spline Quick Disconnect Yoke - Series 6
Prices start at : 46.99 USD

  •  Series 6
  •  Weight: Approximately: 1.96 pounds
  •  Shipping Dimensions: Approximately 5 x 3.5 x 3 inches.
Washington
Seattle
4 ft Orange XB Box Blade
Prices start at : 549.99 USD

Fit and functioned great! About the only negative i can think of is perhaps the quality of the welds could be a notch higher. The heavy gauge steel frame is built to last for years of dependable service.
  •  60 in heavy gauge steel upper frame with replaceable lift and brace arms
  •  This product cannot be shipped to: CA
  •  Limited category 1, 3-point hitch
  •  2 high carbon steel reversible cutting edges
  •  Shipping Dimensions: Approximately 50 x 31 x 29 inches. (LTL truck)
  •  Weight: Approximately: 300 pounds
Washington
Seattle
Category 1 Lower Stay Strap
Prices start at : 10.99 USD

  •  Fits all Ferguson models
  •  This product cannot be shipped to: CA
  •  Fits Ford 2N, 8N, 9N, NAA, 600, 700, 800 & 900
  •  Shipping Dimensions: Approximately 25.5 x 1.5 x .12 inches.
  •  Fits Massey-Ferguson 35 & 50
Washington
Seattle
Hydraulic Adapter - 6MB x 8FPX
Prices start at : 5.49 USD

  •  Use to properly plumb hydraulic system for longer hose service life
  •  Shipping Dimensions: Approximately 4.5 x 2.75 x 1.75 inches.
  •  Weight: Approximately: .19 pounds
  •  This product cannot be shipped to: CA
Washington
Seattle
Category 2 Lift Arm Ball Socket
Prices start at : 8.99 USD

  •  1-1/8 in. pin hole
  •  Yellow zinc dichromate plated
  •  15/16 in. sleeve width
  •  Shipping Dimensions: Approximately 4.75 x 3 x 1 inches.
  •  This product cannot be shipped to: CA
Washington
Seattle
Chain-A-Part - Fits Medium Sizes
Prices start at : 39.99 USD

  •  Instructions included
  •  Fits ANSI no. 35, 40, 41, 50
  •  Patented claming cylinder assures proper pin alignment
  •  Weight: Approximately: .78 pounds
  •  Fits medium sized chains
Washington
Seattle
No. 15 1/4 in x 1 in Self-Colored Woodruff Key - 1 Pk
Prices start at : 1.59 USD

  •  Shipping Dimensions: Approximately 2.88 x 2.88 x .75 inches.
  •  Woodruff keys eliminate the need to mill holes near shaft shoulders
  •  Weight: Approximately: .05 pounds
  •  Item measures 1/4 in W x 1 in D
  •  Fits in a half-moon slot with the shaft, leaving the flat side of the tab exposed
Washington
Seattle
23 Pc Grease Fitting Assortment Set
Prices start at : 9.89 USD

  •  Used for lubricating machinery or equipment
  •  Weight: Approximately: .31 pounds
  •  23 piece set includes an assortment of 8 sizes
  •  Shipping Dimensions: Approximately 6.5 x 3.75 x 1 inches.
Washington
Seattle
48 in Orange Gear-Driven XB Rotary Tiller
Prices start at : 1549.99 USD

It is a great addition to the rest of our equipment! Each flange has six tines, and adjustable skid shoes control cutting depth for consistent results. This tiller is designed for sub-compact tractors up to 25 HP.
  •  Gear-driven side gearbox
  •  Weight: Approximately: 524 pounds
  •  Working depths up to 6.5 in
  •  6 tines for maximum soil mix
  •  A quality constructed tiller that is built to last
  •  6 flanges
Washington
Seattle
800 lb Yellow Polyethylene Fertilizer Spreader
Prices start at : 549.99 USD

  •  Can spread grass seed, granular fertilizer, crystalline herbicides, pesticides, sand, and salt
  •  Category 1 hitch
  •  This product cannot be shipped to: CA
  •  Weight: Approximately: 132 pounds
  •  Hopper can hold up to 800 lb of fertilizer
  •  Seamless polyethylene hopper is strong enough to endure rough handling and is ideal for use with today's highly corrosive fertilizers and herbicides
Washington
Seattle
Category 0-1 Lift Arm Reducer Bushing
Prices start at : 4.19 USD

  •  Fits all category 0 lift arm pins
  •  Shipping Dimensions: Approximately 4.75 x 2.5 x 1 inches.
  •  Weight: Approximately: .22 pounds
  •  5/8 in. inside diameter
  •  7/8 in. outside diameter
  •  Used in the pin hole of a lift arm to allow a smaller category pin to fit
Washington
Seattle
Cross & Bearing Kit - Series 14
Prices start at : 16.99 USD

Name brand at a great valie Perfect fit and heavy duty.
  •  External snap rings
  •  Mfr. item # - 200-1400
  •  Shipping Dimensions: Approximately 3.5 x 3.5 x 1.5 inches.
  •  Made in the USA
  •  This product cannot be shipped to: CA
Washington
Seattle
Stainless Steel Wire Rope Thimble/Clips
Prices start at : 5.79 USD

  •  Choose size according to cable size being used
  •  Weight: Approximately: .1 to .24 pounds depending on selected size
  •  This product cannot be shipped to: CA
Washington
Seattle
Replacement Moldboard
Prices start at : 18.99 USD

  •  1/2 in. x 4 in. x 18 in.
  •  Weight: Approximately: 10.38 to 12 pounds depending on selected size
  •  Replacement moldboard for 3-piece moldboard twist assembly
  •  This product cannot be shipped to: CA
  •  1/2 in. bolt size
Washington
Seattle
Disc Mower Knife - D21-202
Prices start at : 10.99 USD

  •  Made in the USA
  •  Mfr. item number - D21-202
  •  Weight: Approximately: 2 pounds
  •  Replacement for CNH 9847684
Washington
Seattle
Top Link Reducer Bushing
Prices start at : 1.79 USD

  •  Allows a smaller category pin to fit
  •  Shipping Dimensions: Approximately 4.75 x 2.5 x 1 inches to 4.75 x 3 x 1 inches depending on size selected.
  •  Yellow zinc dichromate plated
  •  Used in the pin hole of a top link
Washington
Seattle
New Holland 10 Pk. Rake Tooth Clips
Prices start at : 5.89 USD

  •  Weight: Approximately: .74 pounds
  •  Mfr. item number - PK792-CLIP
  •  Replaces New Holland part 792493
  •  This product cannot be shipped to: CA
Washington
Seattle
Spring Tooth Point - 211D
Prices start at : 8.49 USD

  •  Mfr. item number - 211D
  •  Made from sturdy flat stock for long dependability
  •  High-carbon, heat-treated steel for long-lasting life
  •  Weight: Approximately: 1.6 pounds
  •  2 in. x 5/16 in. x 11 in.
  •  Shipping Dimensions: Approximately 10.5 x 2.25 x 1.9 inches.
Washington
Seattle
NH Steel Rake Tooth - NH-1
Prices start at : 1.99 USD

  •  Made in the USA
  •  9-3/8 in. L x 1-1/16 in. W
  •  Weight: Approximately: .4 pounds
  •  0.144 wire
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 10.5 x 3 x 1 inches.
Washington
Seattle
15 Pc Yellow Chromate Hair Pin Assortment
Prices start at : 1.59 USD

  •  15 piece set includes an assortment of 4 sizes
  •  Shipping Dimensions: Approximately 6 x 2.25 x 1 inches.
  •  This product cannot be shipped to: CA
  •  Used in farm, lawn and garden and other applications to secure attachments and pins
Washington
Seattle
Tractor Yoke - Series 6
Prices start at : 36.99 USD

  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 4.75 x 3.5 x 3 inches.
  •  Domestic 6 series
  •  Made in the USA
Washington
Seattle
10 ga Machinery Bushing
Prices start at : 1.89 USD

  •  Weight: Approximately: .06 to .14 pounds depending on selected size
  •  Use with industrial and farm equipment, electronic equipment and power transmission assemblies
  •  Shipping Dimensions: Approximately 2.88 x 2.88 x .75 inches to 4.88 x 3.88 x .5 inches depending on size selected.
  •  Pack size varies with each bushing
  •  Zinc plated finish
Washington
Seattle
Wire and Cable Swaging Tool
Prices start at : 39.89 USD

  •  24 in. overall length
  •  For crimping cable ferrules and stops
  •  This product cannot be shipped to: CA
  •  Weight: Approximately: 6.04 pounds
Washington
Seattle