Agiseek home

Farm Implements Farm Livestock For Sale In Memphis

Become a Partner
Disc Mower Knife - D31-142
Prices start at : 7.49 USD

  •  Weight: Approximately: 2.2 pounds
  •  Shipping Dimensions: Approximately 6.5 x 2.75 x 1.25 inches.
  •  Counter clockwise rotation
  •  6 pk.
Tennessee
Memphis
Wear Plate - 711-056
Prices start at : 6.49 USD

  •  Made in the USA
  •  Mfr. part number - 711-056
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 7.5 x 2.7 x .8 inches.
Tennessee
Memphis
Fast Change Hitch System
Prices start at : 159.99 USD

  •  Fits Category 1 & 2 hitches
  •  Shipping Dimensions: Approximately 15 x 11 x 3.5 inches.
  •  Mfr. item number - FTF-01FH
  •  This product cannot be shipped to: CA
  •  Attaches to the end of most lift arms
Tennessee
Memphis
6 mm Metric Thread Grease Fitting - 4 Pk
Prices start at : 1.59 USD

  •  This product cannot be shipped to: CA
  •  Weight: Approximately: .02 pounds
  •  Includes 4 fittings
  •  Zinc plated finish
Tennessee
Memphis
Cross & Bearing Kit - Series 35
Prices start at : 19.99 USD

  •  Weight: Approximately: 1.6 pounds
  •  1-1/4 in. bearing cap
  •  Shipping Dimensions: Approximately 4 x 4 x 1.25 inches.
  •  This product cannot be shipped to: CA
  •  External snap rings
Tennessee
Memphis
PTO Spline Adapter
Prices start at : 31.99 USD

  •  Shipping Dimensions: Approximately 6 x 1.75 x 1.75 inches.
  •  6-1/2 in. overall length
  •  21 spline to 6 spline
  •  1-3/8 in. female
  •  This product cannot be shipped to: CA
Tennessee
Memphis
General Purpose Clevis
Prices start at : 13.99 USD

  •  Pin is yellow zinc dichromate plated
  •  2-1/2 in. opening
  •  10,000 lb. working load limit
  •  Clevis has black powder-coat finish
  •  3/4 in. pin diameter
  •  This product cannot be shipped to: CA
Tennessee
Memphis
Hydraulic Adapter - 8FP x 8FPX 90-Degree
Prices start at : 6.29 USD

  •  90-degree connection made by converting a male NPTF to a female NPTF swivel
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 4.5 x 2.75 x 1.75 inches.
  •  Use to properly plumb hydraulic system for longer hose service life
Tennessee
Memphis
Black Universal Rubber Rake Tooth
Prices start at : 2.19 USD

  •  0.325 in bolt hole diameter
  •  10 in tine length from mounting hole
  •  Consistent rubber quality assured by injection molding
  •  0.28125 in tine diameter
  •  Trust Concentric International for quality built replacement rake teeth
  •  Will replace OEM New Holland models 65609, and 850612
Tennessee
Memphis
Rotary Kutter 6 Ft. Blade Set
Prices start at : 51.99 USD

  •  For King Kutter 6 ft. Kutter only
  •  Weight: Approximately: 25 pounds
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 31 x 4.12 x 3.75 inches.
Tennessee
Memphis
Chain-A-Part - Fits Medium Sizes
Prices start at : 39.99 USD

  •  Replacement parts sold separately
  •  Patented claming cylinder assures proper pin alignment
  •  Shipping Dimensions: Approximately 5.3 x 3.05 x 1.3 inches.
  •  Made in the USA
  •  Instructions included
Tennessee
Memphis
Right Rubber Rake Tooth - New Holland
Prices start at : 3.19 USD

  •  Hook-style head for maximum rubber adhesion
  •  Tine diameter - 9/32 in.
  •  Bolt hole opening - 3/8 in.
  •  Replaces New Holland OEM 139041, 850614
  •  Tine length from mounting hole - 10 in.
  •  Heat-treated tines for long-lasting performance
Tennessee
Memphis
Utility Clevis
Prices start at : 2.79 USD

  •  Clevis has black powder-coat finish
  •  Forged for better strength & conformity
  •  Shipping Dimensions: Approximately 1.75 x 1.25 x .75 inches to 3 x 2.5 x 1.25 inches depending on size selected.
  •  Weight: Approximately: .1 to .6 pounds depending on selected size
Tennessee
Memphis
Yoke & Tube Assembly - Series 12
Prices start at : 89.99 USD

  •  Mfr. item # 11001248
  •  Accepts 1 in. x 1-1/8 in. rectangle shaft
  •  Shipping Dimensions: Approximately 38.5 x 3 x 2.5 inches.
  •  Centerline to end of tube dimension - 37.38 in.
  •  Made in the USA
Tennessee
Memphis
New Holland 10 Pk. Rake Tooth Clips
Prices start at : 5.89 USD

  •  This product cannot be shipped to: CA
  •  Mfr. item number - PK792-CLIP
  •  Weight: Approximately: .74 pounds
  •  Shipping Dimensions: Approximately 8 x 5 x 1.65 inches.
Tennessee
Memphis
Hydraulic Adapter - 6MP x 6FPX 90-Degree
Prices start at : 3.99 USD

  •  Shipping Dimensions: Approximately 4.5 x 2.75 x 1.75 inches.
  •  3/8 in. male pipe x 3/8 in. female pipe swivel
  •  This product cannot be shipped to: CA
  •  Use to properly plumb hydraulic system for longer hose service life
Tennessee
Memphis
Metric Cross & Bearing Kit - Series 4
Prices start at : 22.99 USD

  •  Rated HP at 540 RPM - 35
  •  Weight: Approximately: .98 pounds
  •  Bearing diameter - 27 mm
  •  Snap ring type - B
  •  Cap to cap overall length - 74.6 mm
Tennessee
Memphis
Restricted Hydraulic Adapter - 8MP x 8FPX
Prices start at : 5.29 USD

I had to drill the restriction slightly larger to make it "perfect" for my application, but doing so was not a problem, My old grapples on the new skid steer functioned much too fast due to increased hydraulic flow rate on the new machine.
  •  1/2 in. male pipe x 1/2 in. female pipe swivel
  •  Reduction of fluid slows down flow
  •  This product cannot be shipped to: CA
  •  Gives hydraulic system a more controlled application
  •  1/32 in. restricted
Tennessee
Memphis
Hydraulic Adapter - 12MB x 12FPX
Prices start at : 6.49 USD

  •  Use to properly plumb hydraulic system for longer hose service life
  •  This product cannot be shipped to: CA
  •  Converts female O-ring boss port to female pipe swivel
  •  Shipping Dimensions: Approximately 4.5 x 2.75 x 1.75 inches.
Tennessee
Memphis
2500 TX Series Red Tie-Rod Hydraulic Cylinder
Prices start at : 104.99 USD

  •  High strength hard chrome plated cylinder shaft
  •  Model # 40TX24-150
  •  30 month fair exchange manufacturer's warranty
  •  Weight: Approximately: 24.9 to 52.6 pounds depending on selected size
  •  4 in bore
  •  Shock loads up to 5000 psi
Tennessee
Memphis
48 in Yellow ATV Kulti-Packer
Prices start at : 899.99 USD

I bought mine appx. 3 months ago and glad i did, great for my food plots and trails, have nothing but good things to say about it. The King Kutter Kulti-Packer is ideal for getting seeds into the soil in your yard, pasture or food plot.
  •  The King Kutter Kulti-Packer is ideal for getting seeds into the soil in your yard, pasture, or food plot
  •  Easily flips over from tires for transport to packer wheels for working the soil
  •  48 in operating width
  •  Fits 1.875 in ball hitch
  •  3/16 in steel frame
  •  21 individual cast iron packer wheels
Tennessee
Memphis
Category 0-1 Lift Arm Reducer Bushing
Prices start at : 4.19 USD

  •  Two per package
  •  Weight: Approximately: .22 pounds
  •  1-3/8 in. length
  •  This product cannot be shipped to: CA
  •  Fits all category 0 lift arm pins
  •  Yellow zinc dichromate plated
Tennessee
Memphis
Hydraulic Adapter - 10MJ x 8FP
Prices start at : 5.29 USD

  •  5/8 in. male JIC x 1/2 in. female pipe
  •  Converts female JIC to a female NPTF solid
  •  Weight: Approximately: .31 pounds
  •  This product cannot be shipped to: CA
Tennessee
Memphis
Rubber Tightener for Light Truck Tire Chains
Prices start at : 8.49 USD

  •  Rubber with 5 hooks
  •  1 pair
  •  This product cannot be shipped to: CA
  •  10mm x 300mm
Tennessee
Memphis
3/32 In. x 30 Ft. Vinyl-Coated Wire Rope
Prices start at : 6.89 USD

  •  Utility cable
  •  Shipping Dimensions: Approximately 8 x 5.5 x 1.75 inches.
  •  Mfr. item number - 4442665
  •  This product cannot be shipped to: CA
Tennessee
Memphis
Zinc Plated Detent Pin - 1 Pk
Prices start at : 0.89 USD

  •  Zinc plated
  •  The detent ball depresses and springs up for a quick release application
  •  Allows for fast and easy insertion and removal of pin
  •  Weight: Approximately: .02 to .18 pounds depending on selected size
  •  Replaces pins that require a cotter pin style
  •  Suitable for repetitive use applications
Tennessee
Memphis
Wide Base Mud & Skid Steer Chain - 0341055
Prices start at : 92.99 USD

Big traction gains. I bought the chains a month ago and have used them a couple of times. They're heavy duty built, and dig into the snow and ice very well. They work great. As expected, best price with shipping I could find.
  •  This product cannot be shipped to: CA
  •  One pair - 4-link spacing
  •  Fits the following tire sizes - 7.50-16, 8.00-16, 10-16.5NHS, 255/75-15, 29x12.00-16NHS, 235/70-15, 235/80-16, 245/70-17.5, 245/75-16, 10x15, 29x13.50x15, 38x10x18, 235/75-16.5, 255/70-16, LT255/75-15, 265/60-17, 265/70-15, 265/75-15, 275/55-17, 275/60-1
  •  Weight: Approximately: 34 pounds
  •  Tire (not included)
Tennessee
Memphis