Farm Implements Farm Livestock For Sale In High Point

NH Metal Haybine Tooth - NH-2E

Prices start at : 3.39 USD

✓ Made in the USA
✓ Yellow
✓ Weight: Approximately: .71 pounds
✓ Replaces New Holland part #76517
✓ 0.225 wire

North Carolina

High Point

Water-Block Water Absorbing Fuel Filter

Prices start at : 39.99 USD

It can be used to remove water from both gasoline and diesel fuel. Remove microscopic particles of rust, dirt, scale and lint with the Goldenrod Water-Block Water Absorbing Fuel Filter Assembly.

✓ Weight: Approximately: 2.52 pounds
✓ Shipping Dimensions: Approximately 9.75 x 4.13 x 4.13 inches.
✓ Made in the USA
✓ Working pressure up to 150 PSI and flows up to 5 gpm (gravity fed) with 24 inch head
✓ Removes water from gasoline and diesel fuel
✓ Removes microscopic particles (15 microns) of rust, sand, dirt, scale and lint

North Carolina

High Point

Hydraulic Adapter - 8MJ x 6MP

Prices start at : 3.29 USD

✓ This product cannot be shipped to: CA
✓ Weight: Approximately: .19 pounds
✓ Use to properly plumb hydraulic system for longer hose service life
✓ 1/2 in. male JIC x 3/8 in. male pipe

North Carolina

High Point

Metric Cross & Bearing Kit - Series 5

Prices start at : 43.99 USD

✓ Snap ring located in yoke (external)
✓ Shipping Dimensions: Approximately 4 x 4 x 2 inches.
✓ Rated HP at 540 RPM - 48
✓ Snap ring type - B
✓ Cap to cap overall length - 79.4 mm

North Carolina

High Point

Hydraulic Adapter - 8MP x 8FPX

Prices start at : 4.79 USD

✓ Shipping Dimensions: Approximately 4 x 3 x 2 inches.
✓ Weight: Approximately: .25 pounds
✓ 1/2 in. male pipe x 1/2 in. female pipe swivel

North Carolina

High Point

5/16 in x 2 in Slotted Spring Pin - 1 Pk

Prices start at : 1.19 USD

✓ This product cannot be shipped to: CA
✓ Slotted spring pins secure the position of two or more parts of a machine relative to each other
✓ Item measures 5/16 in diameter x 2 in length
✓ Weight: Approximately: .03 pounds
✓ Shipping Dimensions: Approximately 2.88 x 2.88 x .75 inches.

North Carolina

High Point

OK S-Tine Sweep - 2-3/4 In.

Prices start at : 3.89 USD

✓ 2-3/4 in. OK sweep
✓ Designed to fit Danish S-tine & other field preparation equipment of this type
✓ Weight: Approximately: .82 pounds
✓ Shipping Dimensions: Approximately 6.05 x 2.84 x 1.56 inches.
✓ This product cannot be shipped to: CA

North Carolina

High Point

5 ft Green Rotary Kutter w/ Flex Hitch

Prices start at : 1199.99 USD

✓ This product cannot be shipped to: CA
✓ Domed deck design sheds water and debris to prevent material from collecting o the deck
✓ Optional chain guards
✓ Shipping Dimensions: Approximately 90 x 62 x 28 inches. (LTL truck)
✓ Rugged I-beam side rails
✓ Model # L-60-40-SC-FH-JP

North Carolina

High Point

Tiger Shark Sickle Section - 10 Pk.

Prices start at : 10.29 USD

✓ Stays sharper longer
✓ Shipping Dimensions: Approximately 5.25 x 4.5 x 1.75 inches.
✓ Serrated teeth allows more cutting surface
✓ Weight: Approximately: 2.04 pounds
✓ 3 in. x 3-14 in.
✓ Cuts faster

North Carolina

High Point

15 Pc Yellow Chromate Hair Pin Assortment

Prices start at : 1.59 USD

✓ Shipping Dimensions: Approximately 6 x 2.25 x 1 inches.
✓ Used in farm, lawn and garden and other applications to secure attachments and pins
✓ Yellow chromate finish
✓ This product cannot be shipped to: CA

North Carolina

High Point

Hydraulic Adapter - 8MP x 8FPX 45-Degree

Prices start at : 5.79 USD

✓ 45-degree connection made by converting female NPTF fitting to a female NPTF swivel
✓ 1/2 in. male pipe x 1/2 in. female pipe 45-degree swivel
✓ Weight: Approximately: .31 pounds
✓ Shipping Dimensions: Approximately 4.5 x 2.75 x 1.75 inches.
✓ Use to properly plumb hydraulic system for longer hose service life

North Carolina

High Point

1/8 in x 1-1/2 in Yellow Chromate Cotter Pin - 20 Pk

Prices start at : 1.49 USD

✓ Yellow chromate finish
✓ Item measures 1/8 in diameter x 1-1/2 in length
✓ Used in farm, lawn and garden and other applications to secure clevis pins
✓ Shipping Dimensions: Approximately 4.88 x 3.88 x .5 inches.

North Carolina

High Point

Universal Pitman Wood UPW375

Prices start at : 24.99 USD

✓ This product cannot be shipped to: CA
✓ Designed to replace most Pitman Woods
✓ Shipping Dimensions: Approximately 37.5 x 2 x 1.25 inches.

North Carolina

High Point

Metric Series 4 Inner Profile Yoke

Prices start at : 49.99 USD

✓ Weight: Approximately: 2.1 pounds
✓ This product cannot be shipped to: CA
✓ Shield bearing groove
✓ Shipping Dimensions: Approximately 4 x 3 x 2.5 inches.

North Carolina

High Point

Hydraulic Adapter - 8MJ x 6FP

Prices start at : 3.29 USD

✓ Weight: Approximately: .19 pounds
✓ This product cannot be shipped to: CA
✓ Converts female JIC to female NPTF solid
✓ Use to properly plumb hydraulic system for longer hose service life

North Carolina

High Point

Yoke & Shaft Assembly - Series 12

Prices start at : 78.99 USD

✓ Centerline to end of shaft dimension - 37.38 in.
✓ Shipping Dimensions: Approximately 38.5 x 3 x 2.5 inches.
✓ 12 series yoke attached
✓ Weight: Approximately: 13.48 pounds
✓ 1 in. x 1-1/8 in. rectangle shaft weld assembly

North Carolina

High Point

Hydraulic Adapter - 8MB x 6FB

Prices start at : 3.29 USD

✓ Weight: Approximately: .19 pounds
✓ This product cannot be shipped to: CA
✓ 1/2 in. male O-ring boss x 3/8 in. female O-ring boss
✓ Use to properly plumb hydraulic system for longer hose service life

North Carolina

High Point

Rubber Dust Cap 1/2 In. (Black) - 2 Pack

Prices start at : 4.29 USD

✓ Flexible molded rubber for use in all environmental conditions
✓ Weight: Approximately: .14 pounds
✓ Prevents dust & debris from entering hydraulic system
✓ Shipping Dimensions: Approximately 6.75 x 4 x 1.5 inches.

North Carolina

High Point

Hydraulic Adapter - 12FP x 12FP

Prices start at : 7.49 USD

✓ Weight: Approximately: .38 pounds
✓ 3/4 in. female pipe x 3/4 in. female pipe
✓ Shipping Dimensions: Approximately 4 x 3 x 2 inches.
✓ Use to properly plumb hydraulic system for longer hose service life

North Carolina

High Point

3/8 in x 2 in Zinc Plated w/ Vinyl Coated Orange Head Detent Pin - 1 Pk

Prices start at : 6.89 USD

✓ Shipping Dimensions: Approximately 4.38 x 4.25 x .88 inches.
✓ Used as a fast and convenient way to adjust or remove accessories on equipment
✓ This product cannot be shipped to: CA
✓ Suitable for repetitive use applications
✓ Replaces pins that require a cotter pin style
✓ The detent ball depresses and springs up for a quick release application

North Carolina

High Point

Harrow Tine - LN-2

Prices start at : 2.99 USD

✓ Made in the USA
✓ Weight: Approximately: .75 pounds
✓ Shipping Dimensions: Approximately 11.5 x 2 x 2 inches.

North Carolina

High Point

Hydraulic Adapter - 6MP x 6FPX 45-Degree

Prices start at : 4.59 USD

✓ This product cannot be shipped to: CA
✓ Weight: Approximately: .19 pounds
✓ Connects a hose with solid fittings on both ends
✓ 45 degree connection made by converting a female NPTF fitting to a female NPTF swivel

North Carolina

High Point

Male Tip - (ISO) Ball Valve (7/8 In. ORB)

Prices start at : 10.59 USD

✓ This product cannot be shipped to: CA
✓ The proven industry standard for more than 60 years
✓ Meets ISO 5675 dimensional specifications
✓ Weight: Approximately: .2 pounds

North Carolina

High Point

Vinyl Coated Wire Rope

Prices start at : 0.28 USD

✓ CALL STORE FOR AVAILABILITY
✓ Weight: Approximately: .04 pounds
✓ This product cannot be shipped to: CA
✓ Uses heavier gauge wire which offers better abrasion resistance

North Carolina

High Point

Flush Face Hydraulic Skid Steer Quick Coupling

Prices start at : 49.99 USD

✓ Steel body material
✓ Weight: Approximately: .92 pounds
✓ Flush-face design eliminates
✓ Blow-out resistant
✓ Model # VPFEM5018FPNLCS

North Carolina

High Point

Male Tip - John Deere (Old Style) (3/4 In./-8 ORB)

Prices start at : 8.49 USD

✓ Mates wtih John Deere AR47331, RE15361 coupling bodies (Old Style)
✓ Weight: Approximately: .22 pounds
✓ Shipping Dimensions: Approximately 4.25 x 2 x 1.4 inches.
✓ Induction hardened body to prevent brinelling & prolong service life

North Carolina

High Point

Wide Base Mud & Skid Steer Chain - 0342955

★★★★★

Prices start at : 134.99 USD

I recently bought a set of tire chains for my compact tractor.What was surprising was there were no surprises things went exactly as I expected.

✓ Weight: Approximately: 61 pounds
✓ This product cannot be shipped to: CA
✓ One pair - 4-link spacing
✓ Fits the following tire sizes - 12-16.00, 12-16.5NHS, 31.5x13-16.5, 33x10.5-15, 33x12.50-16, 33x12.50-15NHS, 12x15, 12.5-15, 31x13-16.5, 31.5x12.5-15, 32x11.5-15
✓ Heavy twist link

North Carolina

High Point