Farm Equipment Swine Equipment For Sale In Santa Clarita

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

For use on the following power Units: CT325949, CT325979 and CT3259123 Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor.

Chore-Time Multiflo Auger Connectors (2 per pkg)

LP Orfice, Burner, for Classic 170/408

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg).

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate Two M90 augers exiting the boot horizontal to the ground.

Chore-Time Model 108 PVC Tubing

Pilot Assembly with LP Orfice for Classic heaters

Telescoping Drive Tube/Handle also available CT47638 Chore-Time Single Manual Slide Assembly. Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.

Flame sensor with 40" lead for models AB200, AW230, AW325

Pilot Light Orfice, (NG), for Classic 60/348, Classic 115/379, Classic 170/410

Located at the control unit end of the Flex Auger syystem. Chore-Time Model 55 Driver Tube. Driver tube is the piece the Flex Auger slides over and attached to.

Maximum moisture content = 27%. Maximum particle size = 3/16" dia. Chore-Time Model 108 Flex Auger. Delivery Rate = 220 lb./min. With standard 348 RPM power unit. Used to convey high moisture corn, large pellets, shelled corn or ground feed.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 2 hole hog feeder.

Chore-Time Model 108 Tube Connector Only

Control, Hot Surface Ignition

Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617 Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit. Used on M108 Flex Auger Systems from 110' - 150' in length.

Steel tube to Steel tube. Chore-Time Model 90/HMC Tube Connector Only.

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways.

This Weldment will accept the M90 Tube. Chore-Time Model 90 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617 Chore-Time Model 75/90/HMC/108 1HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in...

Contains hose, 06654 adapter. Supply Hose, 3/8" x 10' for Models Guardian60/100, Classic 60N, 115, 115N, 40 (NG).

Used at the end of a Drop Feeding system to control the operation of the power unit. Chore-Time Model 75 Mechanical Drop Feeder Control Unit.

CT5046R Pinion has 21 teeth and a 1/2" diameter bore. Chore-Time Replacement Pinion Gear.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 108 Anchor & Bearing Assembly.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 90 Anchor & Bearing Assembly.

Chore-Time Model 55 PVC 45� Elbow