Farm Equipment Swine Equipment For Sale In San Jose

Fan Wheel, 6-1/2" Diameter X 3-1/8 , used in Classic 60K , 346, and 348 heaters

NG Orfice, Burner, for Classic 115/379

Chore-Time Model 90/HMC Tube Clamp (PVC or Steel)

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. Koehn 1/2" x 48" Original Grip Rattle Paddle without BB's inside to help animals move along alleyways.

G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed. Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock.

Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Used on Flex Auger sysems from 160' - 250' in length.

Telescoping Drive Tube/Handle also available CT47638 Chore-Time Single Manual Slide Assembly. Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90'...

Chore-Time Model 108 45D PVC Elbow

Replacement parts: Motor = CT4229, Pinion Gear = CT5046, Gearhead = CT32615 Chore-Time Model 55 1/3 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Used on Flex Auger sysems from 20' - 150' in length.

Chore-Time Model 55 Twin 30� Lower Boot Assembly. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate Two M55 augers exiting the boot at a 30� angle.

Chore-Time Model 55 Suspension Kit. Each kit includes 3 "S" Hooks, 10' of double loop chain. Used to suspend the M55 Flex Auger from the ceiling. Quantity needed is determined by the length of the M55 auger system.

Maximum moisture content = 18%. Chore-Time Model 75/HMC Flex Auger. I.D. = 1.44" O.D. = 2.38" Maximum particle size = 5/32" dia. With standard 348 RPM power unit. Used to convey mash, crumbles or small pellet feeds.

Chore-Time Flex Auger Anchor Kit

Chore-Time Model 108 PVC Coupler

Chore-Time Gearhead Assembly 216 RPM used in Model 75, 90, HMC, 125, 108 & MF systems. Uses CT3249 Pinion Gear.

Chore-Time Model 90 Driver Weldment Assembly. Assembly includes CT7706 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Chore-Time Model 75 PVC Tubing. Each Tube is 10' long.

Chore-Time Drop Multiflo Tube Switch w/Sensor Plus. The Sensor plus also includes a built in heater to dissapate moisture around the sensor. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time...

Chore-Time Model 108 Anchor & Bearing Assembly. Short anchor tube on this assembly allows for less restriction and more flow into the auger.

Chore-Time Model 108 Single Straight-Out Lower Boot Assembly Only. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot...

Stainless Steel U-bolt for easy adjustment of nipple height. A painted bracket permits you to attach water pipe to wall or paneling. Built tough to resist hog abuse.

Telescoping Drive Tube/Handle also available CT47638 Chore-Time Twin Manual Slide Assembly. Rack and Pinion style Slide Shut-Off assembly for Twin (2) Auger Boots.

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.