Farm Equipment Swine Equipment For Sale In Raleigh

Chore-Time Toggle Switch for CT27711 Auger Timer

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accommodate a Single HMC auger exiting the boot at a 30� angle.

Pilot Light shield for Classic 115/377/379

Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-). Chore-Time DPST Toggle Switch-4 Prong. This is the toggle switch that is located on the control unit (220v, single phase).

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Chore-Time Model 90 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.� Designed for...

Motor, Totally Enclosed, Ball Bearing, 1/8 HP, Guardian 100, AW075

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Four M55 augers exiting the boot at a 30� angle.

Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Used on Flex Auger sysems from 160' - 250' in length.

Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325966, CT325982, and CT3259124

Each kit includes 3 "S" Hooks, 10' of double loop chain. Quantity needed is determined by the length of the M55 auger system. Used to suspend the M55 Flex Auger from the ceiling. Chore-Time Model 55 Suspension Kit.

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Chore-Time Model 90/HMC PVC Coupler

Product Features: Turns any bucket, barrel or even PVC pipe into a waterer Portable watering solution for travel and shows Connects quickly and easily Gravity flow water system kit includes Model 75 nipple and connector.

Perfect for outdoor pens, kennels, garages, dog houses, whelping areas, veterinary clinics, and barns. 72 watts, NRTL, CSA/US approved. Made of durable, easy to clean polyethylene, Kane mats provide a safe and consistent heating surface.

Chore-Time Model 75 Bearing Cap Assembly. This is the bearing assembly used on CT35346 & CT35347 Anchor & Bearing Assemblies manufactured since May 1996.

Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time. Over 30 years of field experience have shown this to be the Injector of choice for most producers.

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways.

Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617 Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length.

LP Orfice, Burner, for Classic 170/408

Delivery Rate = 50 lb./min. Chore-Time Model 75/HMC Flex Auger. Maximum particle size = 5/32" dia. With standard 348 RPM power unit. Maximum moisture content = 18%. I.D. = 1.44" O.D. = 2.38"

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. For a complete lower boot use part number CT9314 This is the lower boot body only.

Commonly used when repairing/replacing M55 pvc tubing. Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

Includes hardware. Chore-Time Model 75/90 Twin Slide Assembly. Slide shut-off assembly used on Model 75/90 Twin Boots, two auger systems.