Farm Equipment Swine Equipment For Sale In Philadelphia

Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.� Designed for...

This AGA approved system generates 12,400 BTU per hour if needed. Theromostat & controls may be removed easily for service. Trojan starts with a long-lasting heavy steel casing and finishes it with a tough, baked-on powder coat finish.

Chore-Time Replacment Vent Pipe Plug. This is the top plug on all Chore-Time Gearheads.

Chore-Time Model 75 Tube Connector w/Clamps

Chore-Time Model 75/90/HMC/108 1HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617 Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in...

Chore-Time Model 108 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Chore-Time Model 75 Tube Connector Only

Chore-Time Model 108 Plastic Drop Tube (5" x 12')

Chore-Time Model 55 PVC Tubing. Each Tube is 10' long.

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Igniter only, no bracket, for HSI and Guardian heaters, (509201)

Chore-Time Model 90/HMC PVC Tubing. Each tube is 10' long.

Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways. The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility.

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 55 Quad Auger Boot Weldment Only. For a complete lower boot use part number CT9315

LP Orfice, Burner, for Classic 170/408

Kane�s polyethylene heat mats installed with�thermostat controls are simply the most energy efficient heat mats in the world.� Kane thermostats reduce power consumption by an additional 50% of the rated watts per crate listings.� Designed for...

This kit made to mount the Trojan water swing includes 6 feet of chain, 2 S-Hooks, 1 Screw Hook and 2 - A7900 Trojan Model 2000 Wrench Curve Nipples.

With standard 348 RPM power unit. Chore-Time Model 55 Flex Auger. Maximum particle size = 5/32" dia. Delivery Rate = 15 lb./min. I.D. = .89" O.D. = 1.52" Used to convey mash, crumbles or small pellet feeds.

The Sensor plus also includes a built in heater to dissapate moisture around the sensor. Chore-Time Universal Drop Tube Switch w/Sensor Plus & Safety Timer. This helps reduce the build up of dust and dirt on the sensor that can lead to false readings.

Chore-Time Model 55 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617 Used on M108 Flex Auger Systems from 110' - 150' in length.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Delivery Rate = 220 lb./min. Maximum moisture content = 27%. With standard 348 RPM power unit. Used to convey high moisture corn, large pellets, shelled corn or ground feed. Chore-Time Model 108 Flex Auger.

Chore-Time Model 55 1/3 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT4229, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 20' - 150' in length.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 1 hole hog feeder.

Chore-Time Replacement 1/4 NPT Pipe Plug. This is the side plug on all Chore-Time Gearheads.