Farm Equipment Swine Equipment For Sale In Paterson

Chore-Time Model 75/90 Twin Slide Assembly. Includes hardware. Slide shut-off assembly used on Model 75/90 Twin Boots, two auger systems.

Chore-Time Model 75 Tube Clamp (PVCI)

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348

Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617 Used on M108 Flex Auger Systems from 110' - 150' in length.

Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617 Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length.

Chore-Time Single Manual Slide Assembly. Telescoping Drive Tube/Handle also available CT47638 Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.

Chore-Time Model 55 Mechanical Drop Feeder Control Unit. Used at the end of a Drop Feeding system to control the operation of the power unit.

Chore-Time Model 75 Mechanical Drop Feeder Control Unit. Used at the end of a Drop Feeding system to control the operation of the power unit.

Chore-Time Model 90/HMC PVC Tubing. Each tube is 10' long.

Chore-Time Flex Auger Anchor Kit

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal to the ground.

I.D. = .89" O.D. = 1.52" Chore-Time Multiflo Flex Auger. Maximum moisture content = 18%. Used to convey mash, crumbles or small pellets. Delivery Rate = 15 lb./min. Maximum particle size = 3/16" dia.

Chore-Time Twin Manual Slide Assembly. Telescoping Drive Tube/Handle also available CT47638 Rack and Pinion style Slide Shut-Off assembly for Twin (2) Auger Boots.

Chore-Time Model 55/75/MF "Y" Outlet. Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes.

A painted bracket permits you to attach water pipe to wall or paneling. Stainless Steel U-bolt for easy adjustment of nipple height. Built tough to resist hog abuse.

Chore-Time Model 90 Drop Kit with Clamps. Clamps hold the Drop in place.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 2 hole hog feeder.

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. For a complete lower boot use part number CT36442 or CT 36589 This is the lower boot body only.

Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed.

Chore-Time Model 55 PVC 45� Elbow

Chore-Time Model 108 Direct Drive Control Unit, 1Phase

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accommodate a Single HMC auger exiting the boot at a 30� angle.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

Chore-Time Model 75 PVC Tubing. Each Tube is 10' long.

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with...

Chore-Time Model 75 PVC Coupler

Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 160' - 250' in length.