Farm Equipment Swine Equipment For Sale In Orange

Chore-Time Micro switch for Hopper Level Control.

100W, 110v heating element installs on any pipe, plastic or metal, in less that one minute using the two springs attached to the Pip-N-Hot unit. After installation on your pipe, simply connect to any 110v electrical supply line or thermostat.

Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617 Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in length and M108 Flex Auger Systems from 60' - 100' in length.

Delivery Rate = 220 lb./min. Maximum particle size = 3/16" dia. With standard 348 RPM power unit. Maximum moisture content = 27%. Used to convey high moisture corn, large pellets, shelled corn or ground feed.

Trojan cuts no corners on componentry�and that�s important when you have sandy water problems or just tough conditions�Trojan performs better when you need it. Outstanding finisher nipple.

All Models use the same tried & proven non-siphoning trouble free 393 valve. Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs. Trojan's Cast Aluminum with baked on powder coat finish.

Chore-Time Model 75 Tube Clamp (Steel)

Chore-Time Model HMC Direct Drive Control Unit, 1Phase

Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved. 108.5 watts per side

The wrench flats make installation an easy task for this one piece body that fits standard 1/2" connections. The Spiglet reduces spray waste by directing the nipple into the mouth.

This is the side plug on all Chore-Time Gearheads. Chore-Time Replacement 1/4 NPT Pipe Plug.

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Translucent feeder provides quick visual check of its contents.

Chore-Time Replacment Oil Seal (Output Shaft) for All Chore-Time Gearheads

Over 30 years of field experience have shown this to be the Injector of choice for most producers. Dosatron's D128R, 7 Gallon, Flat Top Injector has withstood the test of time.

Each Tube is 10' long. Chore-Time Model 75 PVC Tubing.

Each Tube is 10' long. Chore-Time Model 55 PVC Tubing.

These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating. Light weight and small, its perfect for younger members of your crew and can easily be manipulated with one hand.

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

Used on Flex Auger models 55/75/90/HMC This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units. Chore-Time Toggle Switch - 4 Prong.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground.

Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes. Chore-Time Model 55/75/MF "Y" Outlet.

All Models use the same tried & proven non-siphoning trouble free 393 valve. Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs. Trojan's Cast Iron Cup with powder coat finish "Super Stong".

Uses CT3249 Pinion Gear. Chore-Time Gearhead Assembly 216 RPM used in Model 75, 90, HMC, 125, 108 & MF systems.

Attaches to the bottom of the control unit box and funnels feed into a round discharge. Chore-Time Model 75/90 Control Unit Funnel.

Control Valve Replacement for Pilot Light Heaters upto and including Series "J"

High Limit Switch , 350-Deg, for "Classic" Pilot Light Models, includes Bracket

This clamp is to be used to clamp the pvc tube to the control unit assembly. Chore-Time Model 55 Tube Clamp.