Farm Equipment Swine Equipment For Sale In Ontario

Chore-Time Model 55/75/MF Plastic Drop Tube (3" x 12')

Chore-Time Multiflo Flex Auger. Used to convey mash, crumbles or small pellets. Delivery Rate = 15 lb./min. I.D. = .89" O.D. = 1.52" Maximum particle size = 3/16" dia. Maximum moisture content = 18%.

Chore-Time Replacment Vent Pipe Plug. This is the top plug on all Chore-Time Gearheads.

Chore-Time Model 90/HMC/108 Drop Tube Pin. Use with Model 90/ HMC/108 Outlets and CT6381 Drop Tube.

Chore-Time Replacment Oil Seal (Output Shaft) for All Chore-Time Gearheads

Supply Hose, LP Gas, 1/4" X 10', for Classic 60/346, (20543)

Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325966, CT325982, and CT3259124

Chore-Time Model 55 Clear Drop Feeder Assembly. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME...

Chore-Time Flex Auger Clamp for Model 75/90/HMC Driver Weldment at Control Unit. Also used on Model 108 Anchor & Bearing Assembly

Chore-Time Model 55 PVC Tubing. Each Tube is 10' long.

Fan Wheel, 10-3/4" x 4-7/8", for Classic 170/408/410

Trojan's Cast Aluminum Cup featuring the 290 Gravity Valve. Uses the Tip Plate Assembly. Great for use on tank or barrel installations.

Chore-Time Model 90 Single 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot at a 30� angle. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325949, CT325979 and CT3259123

Provide the optimal climate for your animals with Kane's pet and livestock heat mats. 72 watts, NRTL, CSA/US approved. Warning: heat radiating appliance for animals - always use a temperature control device - do not cover Kane heat mats with any articles...

Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable. Rounded hand grips on the top and side make for easy handling. These double panels are perfect for large alleyways, pens and stand alone tasks such as marking...

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 1 hole hog feeder.

Chore-Time Model 90 Driver Weldment Only. Auger slips over tube and uses CT7703 Auger Clamp.

Chore-Time Universal Drop Tube Switch w/Sensor Plus & Safety Timer. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue to operate if the feed...

Chore-Time Model 108 Single Straight-Out Lower Boot Assembly Only. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground.

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Chore-Time 5/8" Shaft Collar. Used on Model 75/90/HMC/108 anchor & bearing assemblies.

Chore-Time Model 75/HMC Driver Weldment Assembly. Assembly includes CT7704 Driver Weldment, CT7703 Aguer Clamp and Cap Screws.

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters

Chore-Time Model 75 Tube Clamp (Steel)

Chore-Time Model 90 Anchor & Bearing Assembly. Short anchor tube on this assembly allows for less restriction and more flow into the auger.

Chore-Time Model 108 Tube Connector w/Clamps