Farm Equipment Swine Equipment For Sale In Olathe

Each Tube is 10' long. Chore-Time Model 75 PVC Tubing.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 90 Anchor & Bearing Assembly.

Chore-Time Model 55 PVC Coupler. Commonly used when repairing/replacing M55 pvc tubing. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.

Chore-Time Model 75 Single Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. This is the lower boot body only.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 55 Anchor & Bearing Assembly.

Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots Chore-Time Boot Bearing Assembly.

Chore-Time Model 108 Tube Connector w/Clamps

Pilot Light shield for Classic 115/377/379

Thermostat, Unit Mount with Bracket, Stainles Steel, (less wiring) Used in all Side Draw Models, (not Guardians)

Chore-Time Model 55 Clear Drop Feeder Assembly. Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10...

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

Chore-Time Model 75/HMC Flex Auger. Used to convey mash, crumbles or small pellet feeds. Maximum moisture content = 18%. Maximum particle size = 5/32" dia. I.D. = 1.44" O.D. = 2.38"

Used on Model 75/90/HMC/108 anchor & bearing assemblies. Chore-Time 5/8" Shaft Collar.

The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making the Rattle Paddle more durable for longer life. The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering...

Igniter only, no bracket, for HSI and Guardian heaters, (509201)

Control, Hot Surface Ignition

Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in length and M108 Flex Auger Systems from 60' - 100' in length. Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

Fan Wheel, 6-1/2" Diameter X 3-1/8 , used in Classic 60K , 346, and 348 heaters

This feeder is easy to fill, made of 20 ga. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed. Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising...

NG Orfice, Burner, for Classic 115/379

Chore-Time Model 108 Plastic Drop Tube (5" x 12')

Must use CT6381 Drop Tube with this Flex-Joint Ring. Chore-Time Model 55/75 Flex-Joint Ring.

This kit made to mount the Trojan water swing includes 6 feet of chain, 2 S-Hooks, 1 Screw Hook and 2 - A7900 Trojan Model 2000 Wrench Curve Nipples.

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 55 Tube Anchor.