Farm Equipment Swine Equipment For Sale In North Las Vegas

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 75 Model Parts Package. This Weldment will accept the M75 Tube.

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 55 Model Parts Package. This Weldment will accept the M55 Tube.

For use on the following power Units: CT325949, CT325979 and CT3259123 Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor.

Used on M108 Flex Auger Systems from 110' - 150' in length. Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 55 Tube Anchor.

Each Tube is 10' long. Chore-Time Model 75 PVC Tubing.

Theromostat & controls may be removed easily for service. This heater performs dependably in harsh winter conditions. The mounting brackets will accommodate most steel, wood, concrete, and plastic water tanks.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 2 hole hog feeder.

Prevent water lines from freezing. After installation on your pipe, simply connect to any 110v electrical supply line or thermostat. Useful as a heat supplement on supply lines under livestock waterers.

Chore-Time Model 108 Tube Connector w/Clamps

Maximum moisture content = 18%. I.D. = 1.75" O.D. = 2.71" Maximum particle size = 3/16" dia. Used to convey mash, crumbles or small pellet feeds. Delivery Rate = 100 lb./min. With standard 348 RPM power unit.

Auger slips over tube and uses CT7703 Auger Clamp/ Chore-Time Model 75/HMC Driver Weldment Only.

This is the toggle switch that is located on the control unit (220v, single phase). Chore-Time DPST Toggle Switch-4 Prong. Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-).

The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making the Rattle Paddle more durable for longer life. Koehn 1/2" x 42" Original Grip Rattle Paddle with BB's inside to help animals move along...

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

Chore-Time Model 108 Plastic Drop Tube (5" x 12')

Chore-Time Toggle Switch for CT27711 Auger Timer

Light weight and small, its perfect for younger members of your crew and can easily be manipulated with one hand. Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable.

This helps reduce the build up of dust and dirt on the sensor that can lead to false readings. Chore-Time Drop Multiflo Tube Switch w/Sensor Plus. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run...

Does not include plastic upper transition boot. Chore-Time Model 55 Quad 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Four M55 augers exiting the boot at a 30� angle.

Auger slips over tube and uses CT7703 Auger Clamp. Chore-Time Model 90 Driver Weldment Only.

Light weight and small, its perfect for younger members of your crew and can easily be manipulated with one hand. Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model HMC Anchor & Bearing Assembly.

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

For a complete lower boot use part number CT36442 or CT 36589 Chore-Time Model 75 Single Auger Boot Weldment Only. This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit,...

Fan Wheel, 6-1/2" Diameter X 3-1/8 , used in Classic 60K , 346, and 348 heaters