Farm Equipment Swine Equipment For Sale In New Hampshire

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot at a 30� angle.

High Limit Switch, 275-Deg., for "Guardian" models, Switch only

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M55 auger exiting the boot at a 30� angle.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model HMC Anchor & Bearing Assembly.

Each tube is 10' long. Chore-Time Model 90/HMC PVC Tubing.

Chore-Time Multiflo Auger Connectors (2 per pkg)

Easy to light & stays lit in the winter. This heater performs dependably in harsh winter conditions. Theromostat & controls may be removed easily for service. Includes LP Hook up. Height is 36 1/2".

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. This is the lower boot body only. For a complete lower boot use part number CT9314

Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg).

Chore-Time Model 75 Tube Connector Only

The Stix & Paddle shafts are made of a vinyl coated fiberglass to eliminate shattering & splintering and has a 180 degree flexibility. Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along alleyways.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 1 hole hog feeder.

Telescoping Drive Tube/Handle also available CT47638 Chore-Time Single Manual Slide Assembly. Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.

The Sensor plus also includes a built in heater to dissapate moisture around the sensor. The Sensor Plus Drop Tube Switch has a built in safety timer that allows the operator to set a Maximum Run Time for the auger to ensure that it will not continue...

CT5046R Pinion has 21 teeth and a 1/2" diameter bore. Chore-Time Replacement Pinion Gear.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617 Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit. Used on M108 Flex Auger Systems from 110' - 150' in length.

These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating. Rounded hand grips on the top and side make for easy handling. Light weight and small, its perfect for younger members of your crew and can...

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. This is the lower boot body only. For a complete lower boot use part number CT9313

For use on the following power Units: CT325966, CT325982, and CT3259124 Chore-Time Model 108 1.5HP , 230V, 1-Phase Replacement Motor.

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved. Kane�s polyethylene heat mats installed with�thermostat controls are simply...

Chore-Time Model 90/HMC 45� PVC Elbow

Must use CT6381 Drop Tube with this Flex-Joint Ring. Chore-Time Model 55/75 Flex-Joint Ring.

It runs on LP or convert to natural gas, developing 4050 BTU per hour. Mount this unit under livestock waterers. An adjustable automatic thermostat permits you to control the temperature for whatever the condition.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618