Farm Equipment Swine Equipment For Sale In Mobile

Igniter only, no bracket, for HSI and Guardian heaters, (509201)

Chore-Time Model 75 Direct Drive Control Unit, 1Phase

Chore-Time Model 108 5" Clamp

Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots. Chore-Time Single Manual Slide Assembly. Telescoping Drive Tube/Handle also available CT47638

It is non-corrosive, self-cleaning with no internal areas for sludge deposits, and threads molded right in for consistency and better sealing. Wrench flats for easy nipple maintenance and stainless steel grommet won't wear out.

I.D. = 1.44" O.D. = 2.38" Maximum moisture content = 18%. Chore-Time Model 75/HMC Flex Auger. Delivery Rate = 50 lb./min. Maximum particle size = 5/32" dia. With standard 348 RPM power unit.

Supply Hose, 3/8" x 10' for Models Guardian60/100, Classic 60N, 115, 115N, 40 (NG). Contains hose, 06654 adapter.

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 75 Model Parts Package. This Weldment will accept the M75 Tube.

Chore-Time Model 55 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with...

Fan Wheel, 10-3/4" x 4-7/8", for Classic 170/408/410

Used on M108 Flex Auger Systems from 110' - 150' in length. Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617

Used on CT46800 Control units. Chore-Time Micro Switch for CT46051 Switch Assembly. (Old number CT7114)

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with...

Chore-Time Model 90 Drop Kit with Clamps. Clamps hold the Drop in place.

Pilot Light shield for Classic 115/377/379

Our new mat is 30% more efficient then fiberglass mats and 80% more efficient than heat lamps. Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with...

Trojan's Cast Aluminum with baked on powder coat finish. Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs. All Models use the same tried & proven non-siphoning trouble free 393 valve.

Chore-Time Model 55 PVC Tubing. Each Tube is 10' long.

Chore-Time Model 90 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Uses the Tip Plate Assembly. Trojan's Cast Aluminum Cup featuring the 290 Gravity Valve. Great for use on tank or barrel installations.

Chore-Time Model 55 Single Auger Boot Weldment Only. For a complete lower boot use part number CT9313 This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Chore-Time Model 108 Single Straight-Out Lower Boot Assembly Only. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground.

Supply Hose, 3/8" x 10' for Models Guardian60/100 HSI. Package contains hose, 06654 adapter.

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

Chore-Time Model 90/HMC PVC Coupler

Chore-Time Model HMC Single Lower Boot Assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accommodate a Single HMC auger exiting the boot at a 30� angle.