Farm Equipment Swine Equipment For Sale In Mesa

Chore-Time Model 75 Tube Anchor. This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe.

Chore-Time Model 55 Clear Drop Feeder Assembly. Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10...

LP Gas Orfice, Burner, for Classic 60/ 346 heaters

Chore-Time Replacment Oil Seal (Output Shaft) for All Chore-Time Gearheads

Chore-Time Model 108 Tube Insert

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Chore-Time Model 108 5" Clamp

Chore-Time Model 90 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters

Pilot Assembly with LP Orfice for Classic heaters

Chore-Time Hopper Level Control for single phase power units. Mounts in the last feeder and will turn ssytem on and off depending on the level of feed in the last feeder.

Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length.

Trojan's Cast Aluminum Cup featuring the 290 Gravity Valve. Uses the Tip Plate Assembly. Great for use on tank or barrel installations.

High Limit Switch , 350-Deg, for "Classic" Pilot Light Models, includes Bracket

Chore-Time Boot Bearing Assembly. Used on Chore-Time M75 Auger Boots prior to 1996 and M125 Boots

Chore-Time Model 55 Twin 30� Lower Boot Assembly. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate Two M55 augers exiting the boot at a 30� angle.

Chore-Time Replacement 1/4 NPT Pipe Plug. This is the side plug on all Chore-Time Gearheads.

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.

Chore-Time Model 75 Single Straight-Out Lower Boot Assembly. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal...

Chore-Time Model 90 Twin Straight-Out Lower Boot Assembly. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate Two M90 augers exiting the boot horizontal...

Chore-Time Model 90/HMC PVC Tubing. Each tube is 10' long.

Chore-Time Model 55 Twin Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. This is the lower boot body only.

NG Orfice, Burner, for Classic 170/410

Chore-Time Model 75/90/HMC /108 Suspension Kit. Each kit includes 25 "S" Hooks, 12 Screw Hooks and 25' of double loop chain. Used to suspend the Flex Auger from the ceiling. Quantity needed is determined by the size and length of the auger system.

Chore-Time Model 90/HMC Tube Connector Only. Steel tube to Steel tube.

Trojan's Cast Aluminum with baked on powder coat finish. All Models use the same tried & proven non-siphoning trouble free 393 valve. Big enough for sows, yet small enough for baby pigs.

Chore-Time Model 108 Tube Connector w/Clamps