Farm Equipment Swine Equipment For Sale In Lubbock

For a complete lower boot use part number CT9313 This is the lower boot body only. Chore-Time Model 55 Single Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

LP Gas Orfice, Burner, for Classic 60/ 346 heaters

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Maximum moisture content = 18%. Used to convey mash, crumbles or small pellets. I.D. = .89" O.D. = 1.52" Maximum particle size = 3/16" dia. Chore-Time Multiflo Flex Auger. Delivery Rate = 15 lb./min.

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 75 Anchor & Bearing Assembly (CT #37346).

Chore-Time Model 108 Plastic Drop Tube (5" x 12')

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 2 hole hog feeder.

This is the auger access door assembly that mounts in the side of a Chore-Time lower boot. Chore-Time Clean-Out Cover Assembly.

Chore-Time Model 108 Tube Connector w/Clamps

Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot at a 30� angle. Chore-Time Model 90 Single 30� Lower Boot Assembly.

46 watts, NRTL, CSA/US approved. Made of durable, easy to clean polyethylene, Kane mats provide a safe and consistent heating surface. Provide the optimal climate for your animals with Kane's pet and livestock heat mats.

Translucent feeder provides quick visual check of its contents. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Chore-Time Model 55 Clear Drop Feeder Assembly.

Chore-Time Nylon Pulley Assembly

Chore-Time Model 90/HMC Tube Connector w/Clamps

Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Chore-Time Model 55 PVC Coupler. Commonly used when repairing/replacing M55 pvc tubing.

Chore-Time Universal Drop Tube Switch w/Sensor Plus. This helps reduce the build up of dust and dirt on the sensor that can lead to false readings. The Sensor plus includes a built in heater to dissapate moisture around the sensor.

Used on Model 75/90/HMC/108 anchor & bearing assemblies. Chore-Time 5/8" Shaft Collar.

NG Orfice, Burner, for Classic 170/410

For a complete lower boot use part number CT9315 This is the lower boot body only. Chore-Time Model 55 Quad Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Steel tube to Steel tube. Chore-Time Model 90/HMC Tube Connector Only.

LP Orfice, Burner, for Classic 170/408

Honeywell Gas Valve, NG Gas, for "K" series or later Pilot Light "Classic" heaters.

Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615 Used on Flex Auger sysems from 160' - 250' in length.

This is the side plug on all Chore-Time Gearheads. Chore-Time Replacement 1/4 NPT Pipe Plug.

Chore-Time Model 90/HMC Tube Clamp (PVC or Steel)

Motor, Totally Enclosed, Ball Bearing, 1/8 HP, Guardian 100, AW075

Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed.