Farm Equipment Swine Equipment For Sale In Knoxville

Trojan starts with a long-lasting heavy steel casing and finishes it with a tough, baked-on powder coat finish. The mounting brackets will accommodate most steel, wood, concrete, and plastic water tanks.

Chore-Time Multiflo Auger Connectors (2 per pkg)

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 75 Model Parts Package. This Weldment will accept the M75 Tube.

Chore-Time Model 90/HMC Bearing Cap Assembly. This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies.

Used on Flex Auger sysems from 160' - 250' in length. Chore-Time Model 55 1/2 HP, 348 RPM, 60HZ-1PH 230V Power Unit. Replacement parts: Motor = CT5703, Pinion Gear = CT5046, Gearhead = CT32615

Provide the optimal climate for your animals with Kane's pet and livestock heat mats. Made of durable, easy to clean polyethylene, Kane mats provide a safe and consistent heating surface.

Chore-Time Model 108 Anchor & Bearing Assembly. Long anchor tube on this assembly allows for more controlled flow into the auger.

Chore-Time 5/8" Shaft Collar. Used on Model 75/90/HMC/108 anchor & bearing assemblies.

All Models use the same tried & proven non-siphoning trouble free 393 valve. Trojan's Cast Aluminum with baked on powder coat finish. Stainless-Steel trip plate & housing. Big enough for sows, yet small enough for baby pigs.

Chore-Time Model 75 PVC Coupler

Commonly used when repairing/replacing M55 pvc tubing. Chore-Time Model 55 PVC Coupler. Glued into place with PVC cement. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available.

The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making the Rattle Paddle more durable for longer life. Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along...

Driver tube is the piece the Flex Auger slides over and attached to. Chore-Time Model 55 Driver Tube. Located at the control unit end of the Flex Auger syystem.

Chore-Time Toggle Switch for CT27711 Auger Timer

Chore-Time Clean-Out Cover Assembly. This is the auger access door assembly that mounts in the side of a Chore-Time lower boot.

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 75 Single Auger Boot Weldment Only. For a complete lower boot use part number CT36442 or CT 36589

Chore-Time Gearhead Assembly 216 RPM used in Model 75, 90, HMC, 125, 108 & MF systems. Uses CT3249 Pinion Gear.

Kane's unique design maintains the optimal temperature for your farrowing environment to reduce stress, improve digestion, and promote rapid growth.� NRTL, CSA/US approved. Our new mat is 30% more efficient then fiberglass mats and 80% more efficient...

Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. Chore-Time Model 55 Quad 30� Lower Boot Assembly. Does not include plastic upper transition boot.

Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length. Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit.

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

Chore-Time Model 75 Tube Connector w/Clamps

Chore-Time Model 108 Tube Insert

Chore-Time Model 75 Drop Kit with Clamps. Clamps hold the Drop in place.

Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length. Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 1 hole hog feeder.

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 90 Model Parts Package. This Weldment will accept the M90 Tube.