Farm Equipment Swine Equipment For Sale In Joliet

Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor. For use on the following power Units: CT325949, CT325979 and CT3259123

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. Chore-Time Model 55 Quad Auger Boot Weldment Only. For a complete lower boot use part number CT9315

Chore-Time Model 55 Tube Clamp. This clamp is to be used to clamp the pvc tube to the control unit assembly.

Chore-Time Gearhead Assembly 216 RPM used in Model 75, 90, HMC, 125, 108 & MF systems. Uses CT3249 Pinion Gear.

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

The vinyl coated fiberglass shaft extends completely thru this nw paddle head & into the end of the poker tip making the Rattle Paddle more durable for longer life. Koehn 1/2" x 48" Original Grip Rattle Paddle with BB's inside to help animals move along...

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

The wrench flats make installation an easy task for this one piece body that fits standard 1/2" connections. Adjusts to 3 water flow rates & features a screen filter that keeps foreign matter out of the valve.

LP Orfice, Burner, for Classic 115/377

Maximum particle size = 3/16" dia. Chore-Time Model 108 Flex Auger. Used to convey high moisture corn, large pellets, shelled corn or ground feed. With standard 348 RPM power unit.

Regulator, Single Stage (LP), Classic 60/346, Classic 115/ 377

Used on M75 Flex Auger sysems from 20' - 80' in length, M90 & HMC Flex Auger sysems from 20' - 30' in length. Chore-Time Model 75/90/HMC 1/2HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5050, Pinion Gear = CT5046, Gearhead = CT32617

Chore-Time Hopper Level Control for single phase power units. Mounts in the last feeder and will turn ssytem on and off depending on the level of feed in the last feeder.

Chore-Time Model 90/HMC Bearing Cap Assembly. This is the bearing assembly used on CT35343, CT35344 & CT35345 Anchor & Bearing Assemblies.

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348

Chore-Time Model 75 Tube Connector w/Clamps

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

Chore-Time Model 75/HMC Driver Weldment Only. Auger slips over tube and uses CT7703 Auger Clamp/

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

Chore-Time Model 75 PVC Tubing. Each Tube is 10' long.

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Delivery Rate = 100 lb./min. With standard 348 RPM power unit. Maximum particle size = 3/16" dia. Maximum moisture content = 18%. Chore-Time Model 90 Flex Auger. Used to convey mash, crumbles or small pellet feeds.

Chore-Time Model 108 Direct Drive Control Unit, 1Phase

Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 75 Model Parts Package. This Weldment will accept the M75 Tube.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model 75 Single 30� Lower Boot Assembly. Does not include plastic upper transition boot.

Supply Hose, 3/8" x 10' for Models Guardian60/100, Classic 60N, 115, 115N, 40 (NG). Contains hose, 06654 adapter.

Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. Chore-Time Model 90 Single Straight-Out Lower Boot Assembly. Does not include plastic upper transition boot.