Farm Equipment Swine Equipment For Sale In Irvine

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...

84.5 watts per side Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall,...

Designed to move animals with ease, Kane sorting boards are light weight yet extremely durable. These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating.

High Limit Switch, 275-Deg., for "Guardian" models, Switch only

Assembly includes CT7706 Driver Weldment, CT7703 Aguer Clamp and Cap Screws. Chore-Time Model 90 Driver Weldment Assembly.

G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed. This feeder is easy to fill, made of 20 ga. Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising...

Use with Model 55/75/90 Outlets and CT1932 Drop Tube. Chore-Time Model 55/75/90/HMC Drop Tube Pin.

Package contains hose, 06654 adapter. Supply Hose, 3/8" x 10' for Models Guardian60/100 HSI.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32615 & CT32617

Chore-Time Model 108 Tube Connector w/Clamps

For use on the following power Units: CT325949, CT325979 and CT3259123 Chore-Time Model 55/75/90/108 1HP, 230V, 1-Phase Replacement Motor.

Chore-Time Model 90 Twin Straight-Out Lower Boot Assembly. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate Two M90 augers exiting the boot horizontal...

Chore-Time Flex Auger Anchor Kit

(Old number CT7114) Used on CT46800 Control units. Chore-Time Micro Switch for CT46051 Switch Assembly.

Chore-Time Model 90/HMC Plastic Drop Tube (3 3/4" x 12')

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Chore-Time Model 75 Single Auger Boot Weldment Only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. This is the lower boot body only.

Chore-Time Micro switch for Hopper Level Control.

Chore-Time Multiflo Nylon 90� Elbow with Coupler & Clamps.

Chore-Time Model 55 Twin 30� Lower Boot Assembly. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate Two M55 augers exiting the boot at a 30� angle.

Chore-Time Model 108 Tube Insert

This helps reduce the build up of dust and dirt on the sensor that can lead to false readings. The Sensor plus includes a built in heater to dissapate moisture around the sensor. Chore-Time Universal Drop Tube Switch w/Sensor Plus.

Clamps hold the Drop in place. Chore-Time Model 90 Drop Kit with Clamps.

This Weldment will accept the M75 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit. Chore-Time Model 75 Model Parts Package.

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters

Chore-Time Model 75 45� PVC Elbow

Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...