Farm Equipment Swine Equipment For Sale In Indianapolis

Chore-Time Model 75 Tube Connector Only (steel conn/PVC pipe)

This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Glued into place with PVC cement. Commonly used when repairing/replacing M55 pvc tubing.

This is a complete Lower Boot that will accomodate a Four M55 augers exiting the boot at a 30� angle. Does not include plastic upper transition boot. Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly.

Regulator, Single Stage (LP), Classic 60/346, Classic 115/ 377

This Weldment will accept the M55 Tube. Chore-Time Model 55 Model Parts Package. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Stainless steel bracket, bolts, nuts, washers & 45 degree elbow. Our Nip-L-Cup allows the pigs to drink from the nipple or from the cup. It also features rounded edges to reduce bacteria & scum from building in corners.

Used on Flex Auger models 55/75/90/HMC Chore-Time Toggle Switch - 4 Prong. This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units.

Telescoping Drive Tube/Handle also available CT47638 Chore-Time Single Manual Slide Assembly. Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.

Chore-Time Replacment Oil Seal (Pinion Side) for Gearheads CT32611, CT32612, CT32616 & CT32618

This is a complete Lower Boot that will accomodate a Single M55 auger exiting the boot at a 30� angle. Does not include plastic upper transition boot. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

(Old number CT7114) Chore-Time Micro Switch for CT46051 Switch Assembly. Used on CT46800 Control units.

This clamp is to be used to clamp the pvc tube to the control unit assembly. Chore-Time Model 55 Tube Clamp.

Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90'...

Long anchor tube on this assembly allows for more controlled flow into the auger. Chore-Time Model 90 Anchor & Bearing Assembly.

Fuel it with LP or convert to natural gas. The control and burner assembly removes easily for service through the hinged cover. Height is 36 1/2". Includes LP Hook up. This heater performs dependably in harsh winter conditions.

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 55 Tube Anchor.

Clamps hold the Drop in place. Chore-Time Model 90 Drop Kit with Clamps.

This is the side plug on all Chore-Time Gearheads. Chore-Time Replacement 1/4 NPT Pipe Plug.

This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal to the ground. Does not include plastic upper transition boot. Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly.

Clamps hold the Drop in place. Chore-Time Model 75 Drop Kit with Clamps.

Used at the end of a Drop Feeding system to control the operation of the power unit. Chore-Time Model 75 Mechanical Drop Feeder Control Unit.

Contains hose, 06654 adapter. Supply Hose, 3/8" x 10' for Models Guardian60/100, Classic 60N, 115, 115N, 40 (NG).

After installation on your pipe, simply connect to any 110v electrical supply line or thermostat. Prevent water lines from freezing. 100W, 110v heating element installs on any pipe, plastic or metal, in less that one minute using the two springs attached...

Maximum particle size = 3/16" dia. Delivery Rate = 15 lb./min. I.D. = .89" O.D. = 1.52" Maximum moisture content = 18%. Chore-Time Multiflo Flex Auger. Used to convey mash, crumbles or small pellets.

Fan Wheel, 6-1/2" Diameter X 3-1/8 , used in Classic 60K , 346, and 348 heaters

Used to suspend the Flex Auger from the ceiling. Quantity needed is determined by the size and length of the auger system. Each kit includes 25 "S" Hooks, 12 Screw Hooks and 25' of double loop chain.

This is the red plastic tube anchor that bolts to the control unit and accepts the pvc pipe. Chore-Time Model 90/HMC Tube Anchor Weldement.