Farm Equipment Swine Equipment For Sale In Grand Prairie

Fan Wheel, 8" Diameter x 4-7/8, for Classic 115/377/379

Delivery Rate = 100 lb./min. Maximum particle size = 3/16" dia. Chore-Time Model 90 Flex Auger. Maximum moisture content = 18%. With standard 348 RPM power unit. I.D. = 1.75" O.D. = 2.71"

Chore-Time Model 75 Tube Clamp (PVCI)

Chore-Time Gearhead Assembly 348 RPM used in Model 75, 90, HMC, 125, & 108 systems. Uses CT6104 Pinion Gear with 1/2 HP and 3/4 HP motors and CT5046 with 1 HP motors.

The Sensor plus also includes a built in heater to dissapate moisture around the sensor. This helps reduce the build up of dust and dirt on the sensor that can lead to false readings.

Chore-Time Model 108 5" Clamp

Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc. For a complete lower boot use part number CT9313 This is the lower boot body only.

Chore-Time Model 90 Driver Weldment Only. Auger slips over tube and uses CT7703 Auger Clamp.

Pilot Light Sheild, used in Classic 60K, 346 and 348 heaters.

These double panels are perfect for large alleyways, pens and stand alone tasks such as marking and medicating. Light weight and small, its perfect for younger members of your crew and can easily be manipulated with one hand.

Each kit includes 25 "S" Hooks, 12 Screw Hooks and 25' of double loop chain. Quantity needed is determined by the size and length of the auger system. Used to suspend the Flex Auger from the ceiling.

Chore-Time Model 90 Model Parts Package. This Weldment will accept the M90 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Delivery Rate = 15 lb./min. Maximum particle size = 5/32" dia. Chore-Time Model 55 Flex Auger. Maximum moisture content = 18%. With standard 348 RPM power unit. I.D. = .89" O.D. = 1.52"

Chore-Time Model 108 Model Parts Package. This Weldment will accept the M108 Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

Chore-Time Micro Switch for CT46051 Switch Assembly. (Old number CT7114) Used on CT46800 Control units.

Chore-Time Clean-Out Cover Assembly. This is the auger access door assembly that mounts in the side of a Chore-Time lower boot.

Chore-Time Model 55 Direct Drive Control Unit, 1 Phase

Chore-Time Model 75/HMC Driver Weldment Only. Auger slips over tube and uses CT7703 Auger Clamp/

Chore-Time Single Manual Slide Assembly. Telescoping Drive Tube/Handle also available CT47638 Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.

Trojan's Cast Aluminum Cup featuring the 290 Gravity Valve. Great for use on tank or barrel installations. Uses the Tip Plate Assembly.

Chore-Time Model 90/HMC Tube Clamp (PVC or Steel)

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348

Valve, Gas control, (LP Gas), 11" W.C., use in AW215CH, AW230EH, FH; All Guardian Models

Delivery Rate = 50 lb./min. Maximum particle size = 5/32" dia. Chore-Time Model 75/HMC Flex Auger. Maximum moisture content = 18%. With standard 348 RPM power unit. I.D. = 1.44" O.D. = 2.38"

Chore-Time Model 75/90/HMC/108 3/4HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7 Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90'...

Chore-Time Model HMC Model Parts Package. This Weldment will accept the HMC Tube. Include the Tube Anchor Plate Weldment, Clamp and Hardware to bolt to the Control Unit.

21" Thermocoupler "Snap In" for all LB White Pilot Light Heaters