Farm Equipment Swine Equipment For Sale In Glendale

Works well on plastic or metal pipes in cold weather. 100W, 110v heating element installs on any pipe, plastic or metal, in less that one minute using the two springs attached to the Pip-N-Hot unit.

Fan Wheel, 6-1/2" Diameter X 3-1/8 , used in Classic 60K , 346, and 348 heaters

Used on M75 Flex Auger sysems from 90' - 150' in length, M90 & HMC Flex Auger sysems from 40' - 90' in length and M108 Flex Auger Systems from 20' - 50' in length. Replacement parts: Motor = CT5051, Pinion Gear = CT5046, Gearhead = CT3261-7

Chore-Time Model 108 PVC Coupler

Fuel it with LP or convert to natural gas. The mounting brackets will accommodate most steel, wood, concrete, and plastic water tanks. Trojan starts with a long-lasting heavy steel casing and finishes it with a tough, baked-on powder coat finish.

With standard 348 RPM power unit. I.D. = .89" O.D. = 1.52" Maximum moisture content = 18%. Maximum particle size = 5/32" dia. Used to convey mash, crumbles or small pellet feeds. Delivery Rate = 15 lb./min.

Used on M108 Flex Auger Systems from 110' - 150' in length. Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617 Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit.

Used under a drop to "Y" or split the feed from one drop tube in to 2 drop tubes. Chore-Time Model 55/75/MF "Y" Outlet.

The state of the art controller will maintain any pre-selected temperature between 68 degrees F and 95 degrees F (20 degrees C and 35 degrees C). It also incorporates a unique safety shutoff protector.

Chore-Time Model 55 Suspension Kit. Quantity needed is determined by the length of the M55 auger system. Used to suspend the M55 Flex Auger from the ceiling. Each kit includes 3 "S" Hooks, 10' of double loop chain.

Dial-A-Temp plugs right into your outlet to provide a quick and easy way to regulate temperature. Perfect for barns, kennels, garages and whelping areas. Just plug your heat mat into the bottom of the control and create a warm, dry environment for your...

Chore-Time Model 75 Twin Auger Boot Weldment Only. For a complete lower boot use part number CT36389 or CT 36390 This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Chore-Time Model 75 Tube Connector Only

Chore-Time Model 90 Single 30� Lower Boot Assembly. Does not include plastic upper transition boot. This is a complete Lower Boot that will accomodate a Single M90 auger exiting the boot at a 30� angle.

Each Tube is 10' long. Chore-Time Model 75 PVC Tubing.

Clamps hold the Drop in place. Chore-Time Model 75 Drop Kit with Clamps.

This is the toggle switch that is located on the control unit (220v, single phase). Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-). Chore-Time DPST Toggle Switch-4 Prong.

Just what you need for small hog operations, 4H or FFA Projects, a galvanized 1 hole hog feeder.

Chore-Time Diaphragm Assembly for CT46051 Switch Assembly

Adjusts to three flow rates. Sharp, deep teeth penetrate bite, improving bonding. Nipple is constructed of long-lasting stainless steel with 360 wrench access. Easy to install! Simply drill a 7/8" hole in your barrel, bucket, pipe or stock tank.

NG Orfice, Burner, for Classic 170/410

Chore-Time Toggle Switch for CT27711 Auger Timer

Chore-Time Model 90 Direct Drive Control Unit, 1Phase

Warning: heat radiating appliance for animals - always use a temperature control device - do not cover Kane heat mats with any articles or materials. Perfect for outdoor pens, kennels, garages, dog houses, whelping areas, veterinary clinics, and barns.

This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units. Used on Flex Auger models 55/75/90/HMC Chore-Time Toggle Switch - 4 Prong.

Chore-Time Model 55 Quad Auger Boot Weldment Only. For a complete lower boot use part number CT9315 This is the lower boot body only. Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.

Motor, Totally Enclosed with Sleeve Bearing, 1/15 HP, Classic 60/346/348