Chore-Time Model 75 Single 30� Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot at a 30� angle. Does not include plastic upper transition boot.
Chore-Time Model 108 1.5HP, 348 RPM, 230v, 60HZ, 1PH Power Unit. Replacement parts: Motor = CT8782, Pinion Gear = CT6104, Gearhead = CT32617 Used on M108 Flex Auger Systems from 110' - 150' in length.
Chore-Time DPST Toggle Switch-4 Prong. Used on Flex Auger models 55/75/90/HMC Older Style Metal Control Unit (Part Numbers 6500-). This is the toggle switch that is located on the control unit (220v, single phase).
Chore-Time Model 55 Driver Tube. Located at the control unit end of the Flex Auger syystem. Driver tube is the piece the Flex Auger slides over and attached to.
Chore-Time Model 55 PVC Coupler. This coupler is used to connect two pieces of M55 tubing together when there is no bell end available. Glued into place with PVC cement. Commonly used when repairing/replacing M55 pvc tubing.
Chore-Time Model 75 Single Straight-Out Lower Boot Assembly. This is a complete Lower Boot that will accomodate a Single M75 auger exiting the boot horizontal to the ground. Does not include plastic upper transition boot.
Chore-Time Model 55 Twin Auger Boot Weldment Only. This is the lower boot body only. For a complete lower boot use part number CT9314 Does Not include anchor & bearing assembly, clean-out cover assembly, cannon ball, slide shut-off kit, etc.
Chore-Time Model 108 Single Straight-Out Lower Boot Assembly Only. This is a complete Lower Boot that will accomodate a Single M108 auger exiting the boot horizontal to the ground.
Made in the near by state of Missouri, here is a hog feeder for your 4H project or small producers raising a few head of livestock. G90 Galvanized steel, has a flapper rain cover, 2 feed holes & holds approximately 150 pounds of feed.
Designed for all types of farrowing in new or remodeled barns, Kane heat mats can be installed on the surface of any type flooring providing the producer with maximum flexibility and energy savings when heating crates, free stall, and comfort stall creep...
Chore-Time Toggle Switch - 4 Prong. Used on Flex Auger models 55/75/90/HMC This is the toggle switch that is located on the CT46051 Switch & Plate Assembly that comes with the New Style 46800- Control Units.
Chore-Time Model 55 Clear Drop Feeder Assembly. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg). Translucent feeder provides quick visual check of its contents.
This is the bearing assembly used on CT35346 & CT35347 Anchor & Bearing Assemblies manufactured since May 1996. Chore-Time Model 75 Bearing Cap Assembly.
Useful as a heat supplement on supply lines under livestock waterers. 100W, 110v heating element installs on any pipe, plastic or metal, in less that one minute using the two springs attached to the Pip-N-Hot unit.
Trojan's Cast Iron Cup with powder coat finish "Super Stong". Big enough for sows, yet small enough for baby pigs. Stainless-Steel trip plate & housing. All Models use the same tried & proven non-siphoning trouble free 393 valve.